The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
SN100C Celebrates 20 Years of Reliability Service
August 20, 2019 | SN100CEstimated reading time: 2 minutes
Nihon Superior Co. Ltd., an advanced joining material supplier, plans to exhibit in booth #518 at 2019 SMTA International, scheduled to take place September 24-25, 2019 at the Donald Stephens Convention Center in Rosemont, Illinois. The company will celebrate the achievements produced by the well-known SN100C lead-free alloy. TipSave N flux-cored solder wire will be introduced and SN100CV P608 D4 solder paste will be shown.
SN100C has been widely accepted as a leading lead-free soldering alloy since it was invented by Nihon Superior’s President Tetsuro Nishimura. The silver-free SN100C alloy delivers a stable microstructure in an alloy that can accommodate the long-term cyclic strains and impact loading to which a solder joint can be subjected. The micro-addition of nickel enhances the performance of SnCu resulting in smooth and bright fillets with few shrinkage defects and a stable microstructure with minimal growth of the interfacial intermetallic, ensuring highly reliable solder joints.
The newly developed TipSave N flux cored solder wire extends soldering iron tip life by 3X. Paired with the (032) no-clean, halogen-free cored-flux, it provides fast wetting and low spattering. TipSave N is a good match for hand soldering as well as continuous robotic soldering as it reduces required soldering tip change overs, increasing production while reducing cost.
SN100CV P608 D4 is a completely halogen free, lead-free, no-clean solder paste. Unlike silver-containing alloys that derive their strength from a dispersion of fine particles of eutectic Ag3Sn, SN100CV gains its strength from solute atoms in the tin matrix of the joint. The paste provides excellent wetting and reduces voiding.
Nihon Superior continues to offer solutions to the challenges facing the electronics industry, such as improvements in reliability, thermally stable joining, and lead-free die attach. For more information about Nihon Superior’s new solder pastes and lead-free products, visit us at booth #518 or at www.nihonsuperior.co.jp/english.
About Nihon Superior Co., Ltd.
Nihon Superior was founded in 1966 when it began marketing unique flux products imported from the US. The company made its mark on society by gathering the most advanced soldering and brazing technologies and products from around the world, and supplying them to companies in the metal-joining industry. A turning point for the company came when it started developing its own soldering materials and with the success of its unique SN100C lead-free solder alloy Nihon Superior has become a major player in the global market. To support the growing demand for its products, Nihon Superior has established manufacturing and sales centers in Japan, China and other Asian countries, and the United States, and formed business partnerships with companies in other markets.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.