Knocking Down the Bone Pile: Revamp Your Components with BGA Reballing
Global Sourcing Spotlight: Balancing Speed and Flexibility Without Sacrificing Control
SMT Perspectives & Prospects: Artificial Intelligence Part 6: Data Module 1
SEHO to Exhibit at SMTAI
August 21, 2019 | SEHO North America, Inc.Estimated reading time: 1 minute
SEHO North America, Inc. will exhibit at SMTA International, scheduled to take place September 24-25, 2019 at the Donald Stephens Convention Center in Rosemont, Illinois. Meet the SEHO experts in booth #309.
SEHO constantly develops its range of soldering solutions and will introduce the new StartSelective – the perfect plug-and-produce selective soldering system for those just entering into automated soldering.
The StartSelective is thought through down to the last detail, from its compact design, ease of operation and many technical highlights. With a footprint of only 2.5 m², the StartSelective provides maximum quality and reproducibility of soldering results for assemblies up to 20" x 20" and an outstanding return on investment.
While all process steps are fully automated and monitored, loading and unloading of assemblies is done manually.
The bottom-side preheat section of the StartSelective is equipped with pulsar heaters over the full area, which can be activated individually depending on board dimensions. Pulsar heaters feature a high energy density and quick reaction time. This enables a remarkable reduction in energy consumption.
An additional top-side IR preheating ensures permanent and controlled heat support during long cycles.
Another highlight is the optimized soldering area with non-wetted mini-wave solder nozzles, featuring a 7° soldering angle. The nozzles convince with stable and reproducible flow properties, resulting in outstanding soldering quality. Even difficult geometries can be soldered easily. Moreover, non-wetted solder nozzles are maintenance-free and feature a nearly unlimited lifetime, thus avoiding follow-up costs.
Just like the high-volume selective soldering systems from SEHO, the StartSelective is equipped with a complete package for automated process control. The system is designed for maximum efficiency. Programming is 100 percent offline at any PC workplace so that the machine is always available for production.
All setup, retooling and maintenance are easily accessible on one side of the machine. This design allows users to integrate the StartSelective in any production island with minimum footprint requirements, or to place it as stand-alone system in the corner of the production floor.
The SEHO team is looking forward to welcoming visitors to Booth #309 during the SMTA International. For more information, visit www.seho.de.
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
Rehm Wins Mexico Technology Award for CondensoXLine with Formic Acid
10/17/2025 | Rehm Thermal SystemsModern electronics manufacturing requires technologies with high reliability. By using formic acid in convection, condensation, and contact soldering, Rehm Thermal Systems’ equipment ensures reliable, void-free solder joints — even when using flux-free solder pastes.
Indium Experts to Deliver Technical Presentations at SMTA International
10/14/2025 | Indium CorporationAs one of the leading materials providers to the power electronics assembly industry, Indium Corporation experts will share their technical insight on a wide range of innovative solder solutions at SMTA International (SMTAI), to be held October 19-23 in Rosemont, Illinois.
Knocking Down the Bone Pile: Revamp Your Components with BGA Reballing
10/14/2025 | Nash Bell -- Column: Knocking Down the Bone PileBall grid array (BGA) components evolved from pin grid array (PGA) devices, carrying over many of the same electrical benefits while introducing a more compact and efficient interconnect format. Instead of discrete leads, BGAs rely on solder balls on the underside of the package to connect to the PCB. In some advanced designs, solder balls are on both the PCB and the BGA package. In stacked configurations, such as package-on-package (PoP), these solder balls also interconnect multiple packages, enabling higher functionality in a smaller footprint.
Indium to Showcase High-Reliability Solder and Flux-Cored Wire Solutions at SMTA International
10/09/2025 | Indium CorporationAs one of the leading materials providers in the electronics industry, Indium Corporation® will feature its innovative, high-reliability solder and flux-cored wire products at SMTA International (SMTAI), to be held October 19-23 in Rosemont, Illinois.
‘Create your Connections’ – Rehm at productronica 2025 in Munich
10/08/2025 | Rehm Thermal SystemsThe electronics industry is undergoing dynamic transformation: smart production lines, sustainability, artificial intelligence, and sensor technologies dominate current discussions.