Dan’s Biz Bookshelf: 'Hidden Potential: The Science of Achieving Greater Things'
Trouble in Your Tank: Minimizing Small-via Defects for High-reliability PCBs
It’s Only Common Sense: 20 Lessons in 20 Years—A Career in Common Sense
Yamaha Motor Europe FA Launches SCARA Robot ‘YK400XE’
September 6, 2019 | Yamaha Motor EuropeEstimated reading time: Less than a minute
Yamaha Motor Europe FA Section will release new SCARA robot “YK400 XE” (with an arm length of 400 mm) on September 17, 2019.
This “YK400XE” is a successor model of the conventional model “YK400XR” that features high accuracy and high performance even at a less expensive price. The maximum payload is 4 kg that is 1.4 times larger than the conventional model and the standard cycle time is reduced approx. 10% to achieve 0.41 sec. by strengthening the drive system and arm, increasing the rigidity, and improving the performance of the controller “RCX340.” As a result, the production capacity is much improved.
Even when the maximum payload is increased and the operating performance is improved, the high cost performance is achieved. In addition, as the installation position is fully compatible with the conventional model, the replacement work can be performed easily.
This product will be exhibited at Yamaha’s booth 7328 in hall 7 at Motek Show 2019 from 7th – 10th October 2019 in Stuttgart, Germany.
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
08/15/2025 | Marcy LaRont, I-Connect007In our industry, my top reads include Prashant Patel’s overview and argument for reshoring, which I found to be a great general overview and breakdown. In further support of the onshoring/reshoring message, I’m highlighting Nolan Johnson’s interview on the survey and report by the Reshoring Initiative. Check out my interview with USPAE’s Jim Will on the state of the flat panel display (FPD) industry and the risks associated with it for U.S. defense and critical infrastructure products.
Global Electronics Industry Remains Under Pressure from Rising Costs
08/04/2025 | Global Electronics AssociationThe global electronics manufacturing supply chain remains under pressure from rising costs, with 61% of firms reporting higher material costs and 54% noting increased labor expenses. according to the Global Electronics Association’s Sentiment of the Global Electronics Manufacturing Supply Chain Report.
Statement from the Global Electronics Association on the July 2025 Tariff on Copper Foil and Electronics-Grade Copper Inputs
07/31/2025 | Global Electronics AssociationWe are disappointed by today’s decision to impose a 50% tariff on imported copper foil and other essential materials critical to electronics manufacturing in the United States.
Direct Metallization: A Sustainable Shift in PCB Fabrication
07/31/2025 | Jim Watkowski, Harry Yang, and Mark Edwards, MacDermid Alpha Electronics SolutionsThe global electronics industry is undergoing a significant transformation, driven by the need for more resilient supply chains and environmentally sustainable manufacturing practices. Printed circuit boards (PCBs), the backbone of interconnection for electronic devices, are at the center of this shift. Traditionally, PCB fabrication has relied heavily on electroless copper, a process that, while effective, is resource-intensive and environmentally hazardous. In response, many manufacturers are turning to direct metallization technologies as a cleaner, more efficient alternative.
Considering the Future of Impending Copper Tariffs
07/30/2025 | I-Connect007 Editorial TeamThe Global Electronics Association is alerting industry members that a potential 50% tariff on copper could hit U.S. electronics manufacturers where it hurts.