Share on:

Share on LinkedIn Share on X Share on Facebook Share with email

Testimonial

"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "

Brent Fischthal - Koh Young

Suggested Items

Getters for Hermetic Packages: Mechanisms, Reliability Impact, and MacDermid Alpha Electronics Solutions

06/11/2026 | Michael Previti, MacDermid Alpha Electronics Solutions
Hermetic packages protect chips, lasers, and sensors from the outside world, but the cavity inside can still change after seal. Small amounts of water, hydrogen, carbon dioxide, and organic vapor may remain after build or may form later from adhesives, films, and other internal materials. Getters reduce that risk by creating a planned sink for those gases inside the package. When teams choose the right getter early, they hold the headspace steady, cut reliability escapes, and lower the life-cycle cost of a high-value device.

Applied Materials Expands Singapore Manufacturing to Support AI Chip Demand

06/11/2026 | Applied Materials
Applied Materials, Inc., the leader in materials engineering solutions for the semiconductor industry, has expanded its manufacturing and R&D operations in Singapore to support the global build-out of AI infrastructure.

Getters, Thermal Management, and High-Reliability Packaging: What’s Ahead in the Next Issue of Advanced Electronics Packaging Digest

06/10/2026 | I-Connect007
The upcoming issue of Advanced Electronics Packaging Digest explores several technologies shaping the future of advanced packaging, from maintaining stable environments inside hermetic packages to managing heat in increasingly complex 3D architectures. The issue also examines packaging innovations for aerospace, defense, and automotive applications, as well as broader connections between semiconductor interconnects and the systems they support.

Below the Surface: From Nanometers to 10-Gauge—It’s More Than Just a Wire

06/11/2026 | Chandra Gupta -- Column: Below the Surface
Modern life runs on wires: your cell phone, your car, the satellites orbiting above us, and even the dryer in your laundry room all depend on the simple idea of moving electricity from one place to another. From nanometer-scale traces etched onto a semiconductor chip to a thick 10-gauge copper wire carrying current to heat your clothes, it’s tempting to say, “It’s just a wire.” But that hides the real story. The magic isn’t the wire itself, but in the materials that insulate, protect, support, and connect it, often under extreme conditions of heat, voltage, vibration, and time.

Powering the Future: When Material Choice Defines RF Performance

06/10/2026 | Brian Buyea -- Column: Powering the Future
In RF and microwave design, deciding on which materials to use determines whether your design merely works or truly performs. Yet, designers too often fall back on material selection that is familiar, available, or “good enough.” However, once you move into higher frequencies, higher power densities, and tighter performance tolerances, “good enough” becomes the very thing that holds your design back. That’s where ceramic substrates become a fundamentally different approach to solving RF challenges.
Subscribe | Magazines | RealTime with | JobConnect007 | Education | Webinars
Copyright © I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in