The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
New Ultrasonic Coating System Advances Spray-On EMI Shielding Capabilities
January 14, 2020 | Sono-TekEstimated reading time: 1 minute
Sono-Tek Corporation (OTC BB: SOTK) announces the release of a new ultrasonic coating system, the FlexiCoat EMI, specifically designed for conformal spraying of EMI (Electromagnetic Interference) shielding material onto semiconductor packages. This new market is seeing growing interest and activity as a result of smaller devices requiring improved EMI shielding protection properties. Conventional techniques such as shield cans and SMT clips are inadequate for newer small devices. Ultrasonic coating is a cost-effective, faster and simpler alternative to expensive sputtering-based coating equipment.
Sono-Tek’s FlexiCoat EMI is an automated XYZ coating system specifically engineered and proven to spray copper and silver-filled shielding materials with precise control of coating characteristics and little overspray.
Sono-Tek ultrasonic nozzles are widely known for their low/no maintenance, non-clogging, high uniformity and highly repeatable performance. A special ultrasonic nozzle configuration was developed for these EMI applications to provide a more targeted spray area that reduces overspray drastically when compared with all other spray types. This new nozzle design is fully integrated into the FlexiCoat EMI system, along with an array of application-driven features to make the system a full coating solution for EMI shielding coatings.
Some features of the FlexiCoat EMI system include:
- 500x500 mm slides, conveyor and pumping system
- Proprietary ink mixing system to ensure ink stability over time
- UPH/throughput is significantly faster than sputtering at 1/10 the price
- Compatible with ink formulations from Tatsuta and other ink providers
- Uniform shielding coverage on top and sides of package is achieved using nozzle tilt
- Top surface: sidewall thickness ratio of 1: 0.6 ~ 0.7
Bennett Bruntil, Sono-Tek’s Vice President of Sales & Marketing, said: “Our entry into this growing semiconductor application was a natural outgrowth of our semiconductor coating expertise in other applications. Our equipment is quickly proving to be an excellent fit for companies looking for an effective, low-cost alternative to sputtering for deposition of new copper and silver-filled epoxy materials on the market.
Share on:
Suggested Items
Global PCB Connections: Following DFM Rules Leads to Better Boards
12/18/2024 | Jerome Larez -- Column: Global PCB ConnectionsAs a PCB field applications engineer, ensuring smooth communication between PCB designers and fabricators is one of my frequent challenges. A critical part of that dialogue is design for manufacturing (DFM). Many designers, even experienced ones, often misunderstand or overlook important DFM considerations. They may confuse design rules with manufacturing minimums, leading to technically feasible designs that are difficult or costly to produce. In this column, I will clarify some common DFM guidelines and help designers understand the difference between “design rules” and “minimums” while sharing best practices that will simplify the production process and ensure the highest quality PCB.
Sayonara to the Last Standing Copper Foil Plant in North America
12/17/2024 | Marcy LaRont, I-Connect007In July 2021, PCB007 Magazine published an interview with Michael Coll and Chris Stevens of Nippon Denkai about the new acquisition by Nippon Denkai of the last-standing ED foil manufacturer in North America. The plant in Augusta, Georgia, was formerly owned by Oak Mitsui, Inc. and had been purchased by Nippon Denkai the previous March, after which significant investment was made with the expectation of providing more jobs.
SCHMID Group Unveils Enhanced InfinityLine H+ for Electroless Copper Deposition
12/16/2024 | SCHMID GroupThe SCHMID Group, a global leader in high-tech solutions for the electronics industry, proudly announces significant updates to its flagship InfinityLine H+ Electroless Cu system. Specifically designed for the production of high- performance advanced packaging applications using mSAP and SAP processes, the system reflects SCHMID’s expertise in horizontal electroless copper deposition.
OKI Develops PCB Technology with Stepped Copper Coin Insertion to Achieve 55 Times Better Heat Dissipation in Outer Space
12/12/2024 | BUSINESS WIREThe OKI Group printed circuit board (PCB) business company OKI Circuit Technology has successfully developed multilayer PCB technology with stepped copper coin insertion to achieve 55 times better heat dissipation compared to conventional PCB. The stepped copper coin is offered in two types, circular and rectangular, to suit the shape of the electronic component mounted on the PCB. OTC is working to develop mass-production technologies with the aim of introducing PCBs incorporating this new technology into markets for compact devices or devices used in outer space or other environments where air cooling technology cannot be used.
Fresh PCB Concepts: PCB Plating Process Overview
12/12/2024 | Team NCAB -- Column: Fresh PCB ConceptsIn this installment of Fresh PCB Concepts, Mike Marshall takes the helm stating: PCBs have been the platform for the interconnection of electronic components for decades. Because of process costs and other constraints, such as mechanical properties or size limitations of the alternatives, PCBs will remain the standard low-cost interconnection technology. Rapidly increasing performance and functionality requirements of wireless and high-speed devices have challenged the development and implementation of new manufacturing solutions.