Elementary, Mr. Watson: Rules of Thumb—Guidelines vs. Principles for PCB Design
Beyond Design: High-speed Rules of Thumb
Global PCB Connections: A Technical Overview of Long-flex Printed Circuit Boards
Meet Two New CID Grads: Kalen Brown and Michael Steffen
January 15, 2020 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 1 minute
If you’re a designer with 30 or 40 years of experience, you might be wondering who is going to replace you when you retire. If so, read on!
At PCB West, I spoke with two newly minted Certified Interconnect Designers: Kalen Brown of EaglePicher and Michael Steffen of Crystal Group. After passing the CID exam, they attended the IPC Designers Council (DC) Executive Board Meeting, where the more “seasoned” veterans were very happy to meet them.
Kalen and Michael shared their thoughts on the job, the PCB design community, and the need for designers to continue their education throughout their careers.
Andy Shaughnessy: Kalen, you are a newly minted CID recipient. Tell us about your class.
Kalen Brown: Yes. I attended Kelly Dack’s class. We just finished, and it was a great class. I learned a lot of stuff I didn’t know that I didn’t know.
Shaughnessy: How long have you been in the industry?
Brown: I graduated and joined the industry about five years ago. My first job was at an EaglePicher Technologies doing software, electrical design, and board layout. We don’t fabricate the boards; we just design and send them out to be built and assembled. EaglePicher makes mission-critical batteries and the group that I am in works on battery management systems to keep a battery safe. I have learned a lot and didn’t know very much about circuit board design from out of school. It was an eye-opening experience getting thrown into it. Now, I realize that it wasn’t always a job for electrical engineers. I had no idea that a board designer and an engineer were two different people; that was a very big learning experience too. Everybody here has been very passionate about what they do. It has been incredible to hear all of the stories, and everyone wants to help. It seems like it’s a great group to be in, which makes me very excited.
Shaughnessy: We were just at the IPC DC Executive Board Meeting, which was open to the public. Was that your first IPC DC meeting?
Brown: Yes, this was my first time attending PCB West, my first CID class, and my first IPC DC meeting. It was a lot of firsts for me.
To read this entire interview, which appeared in the November 2019 issue of Design007 Magazine, click here.
Share on:
Suggested Items
PCB Layout Rules of Thumb for Consideration
11/25/2024 | Patrick Davis, Cadence Design SystemsJust because a “rule of thumb” is usually based on experience instead of precise facts doesn’t negate its value. For instance, when I told my kids that a good rule of thumb was not to back-talk to their mother, they discovered very quickly how accurate my advice was once they crossed that line. There are a lot of rules of thumb that we rely on daily, including those that apply to PCB design.
HPC Customer Engages Sondrel for High End Chip Design
11/25/2024 | SondrelSondrel, a leading provider of ultra-complex custom chips, has announced that it has started front end, RTL design and verification work on a high-performance computing (HPC) chip project for a major new customer.
Rules of Thumb for PCB Layout
11/21/2024 | Andy Shaughnessy, I-Connect007The dictionary defines a “rule of thumb” as “a broadly accurate guide or principle, based on experience or practice rather than theory.” Rules of thumb are often the foundation of a PCB designer’s thought process when tackling a layout. Ultimately, a product spec or design guideline will provide the detailed design guidance, but rules of thumb can help to provide the general guidance that will help to streamline the layout process and avoid design or manufacturing issues.
PCB Design Software Market Expected to Hit $9.2B by 2031
11/21/2024 | openPRThis report provides an overview of the PCB design software market, detailing key market drivers, challenges, technological advancements, regional dynamics, and future trends. With a projected compound annual growth rate (CAGR) of 13.4% from 2024 to 2031, the market is expected to grow from USD 3.9 billion in 2024 to USD 9.2 billion by 2031.
KYZEN to Spotlight KYZEN E5631, AQUANOX A4618 and Process Control at SMTA Silicon Valley Expo and Tech Forum
11/21/2024 | KYZEN'KYZEN, the global leader in innovative environmentally friendly cleaning chemistries, will exhibit at the SMTA Silicon Valley Expo & Tech Forum on Thursday, December 5, 2024 at the Fremont Marriott Silicon Valley in Fremont, CA.