The Right Approach: Get Ready for ISO 9001 Version 6
Dan’s Biz Bookshelf: ‘Still Broke: Walmart’s Remarkable Transformation'
Driving Innovation: Depth Routing Processes—Achieving Unparalleled Precision in Complex PCBs
Not All Plating Lines Are Created Equal
February 12, 2020 | I-Connect007 Editorial TeamEstimated reading time: 12 minutes
Barry Matties and Happy Holden met with CEO Michael Ludy and CMO Sarah Großmann from Ludy, a company specializing in galvanic plating equipment for PCBs. During one of I-Connect007’s visit to GreenSource Fabrication, the team found Ludy equipment being utilized there, so Barry and Happy traveled to their factory in Germany to learn more about the company.
The following interview gives an overview of Ludy and their latest advancements in PCB plating equipment.
Barry Matties: Let’s start with a little bit about your product.
Sarah Großmann: We produce galvanic plants for PCBs. That’s our main task. We have a highly specialized way of having the galvanic tanks and the geometry of the tanks, where the plating and the aspect ratio is much better. We tried to focus mainly on PCBs in the past years. We fulfilled the demands and ideas of Alex Stepinski and what he thought could work. We are flexible and gave him a plant with the newest technology. He can fulfill his plating demands and multiple processes internally.
Generally, this is the main thing we do, but we also do the research for waste-air-free and wastewater-free galvanic plants like the GalvanoMat® PCB. That’s our main idea of fulfilling a complete green fabrication in one. You have one container where the galvanic plant is inside, and one container getting the waste air, wastewater, and energy recovery, and everything goes in one circle. You don’t have to waste that much and fulfill all the green fabrication requirements that are needed.
We have it for metal finishing and PCBs. We’re trying to get back in the U.S. market. We were there already. The lines are still running, and it’s going more and more to green fabrication. This is why we mostly do R&D for the GalvanoMat® PCB.
Figure 1: Overview of the latest generation of Ludy plating line with split-tank hoist access.
Happy Holden: People would probably buy brand new plating equipment because of high-density interconnect (HDI) and substrate-like PCBs (SLPs). All of which have very tiny holes and a much higher aspect ratio, which the conventional anode to cathode and one-axis agitation or area agitation is not sufficient for the throwing power and things like that.
Großmann: The anodes are inside, and every one of those segmented anodes is separately controlled by a rectifier.
Holden: Can you do pulse plating too?
Großmann: It would be possible, depending on the chemistry. The problem is that in the galvanic plant area, the people stick to what they know and don’t want to invest high amounts of money for testing around. This is a problem. That’s why the research steps are not very fast compared to other machine areas. They know that the chemistry is also influencing this area, and if Atotech says they’re not sure, then nobody will invest money on that. That’s why we are pretty happy that our solution worked and was inclusive with a 3D agitation drive. We have a very good distribution overall of the PCB on both sides. Those are the main benefits of the system.
Holden: The North American market has the common board, but then they have leading-edge things for medical, aerospace, or radar, where they want to go to a much higher aspect ratio both on through-holes and on blind vias. The problem is typical galvanic equipment isn’t there yet. Some believe the Ludy equipment will take them there, which means adopting the old way. There’s a big difference in productivity between four hours and 50 minutes.Page 1 of 4
Share on:
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
Closing the Loop on PCB Etching Waste
09/09/2025 | Shawn Stone, IECAs the PCB industry continues its push toward greener, more cost-efficient operations, Sigma Engineering’s Mecer System offers a comprehensive solution to two of the industry’s most persistent pain points: etchant consumption and rinse water waste. Designed as a modular, fully automated platform, the Mecer System regenerates spent copper etchants—both alkaline and acidic—and simultaneously recycles rinse water, transforming a traditionally linear chemical process into a closed-loop system.
Driving Innovation: Depth Routing Processes—Achieving Unparalleled Precision in Complex PCBs
09/08/2025 | Kurt Palmer -- Column: Driving InnovationIn PCB manufacturing, the demand for increasingly complex and miniaturized designs continually pushes the boundaries of traditional fabrication methods, including depth routing. Success in these applications demands not only on robust machinery but also sophisticated control functions. PCB manufacturers rely on advanced machine features and process methodologies to meet their precise depth routing goals. Here, I’ll explore some crucial functions that empower manufacturers to master complex depth routing challenges.
Trouble in Your Tank: Minimizing Small-via Defects for High-reliability PCBs
08/27/2025 | Michael Carano -- Column: Trouble in Your TankTo quote the comedian Stephen Wright, “If at first you don’t succeed, then skydiving is not for you.” That can be the battle cry when you find that only small-diameter vias are exhibiting voids. Why are small holes more prone to voids than larger vias when processed through electroless copper? There are several reasons.
The Government Circuit: Navigating New Trade Headwinds and New Partnerships
08/25/2025 | Chris Mitchell -- Column: The Government CircuitAs global trade winds continue to howl, the electronics manufacturing industry finds itself at a critical juncture. After months of warnings, the U.S. Government has implemented a broad array of tariff increases, with fresh duties hitting copper-based products, semiconductors, and imports from many nations. On the positive side, tentative trade agreements with Europe, China, Japan, and other nations are providing at least some clarity and counterbalance.
How Good Design Enables Sustainable PCBs
08/21/2025 | Gerry Partida, Summit InterconnectSustainability has become a key focus for PCB companies seeking to reduce waste, conserve energy, and optimize resources. While many discussions on sustainability center around materials or energy-efficient processes, PCB design is an often overlooked factor that lies at the heart of manufacturing. Good design practices, especially those based on established IPC standards, play a central role in enabling sustainable PCB production. By ensuring designs are manufacturable and reliable, engineers can significantly reduce the environmental impact of their products.