Airbus Reveals Its Blended Wing Aircraft Demonstrator
February 13, 2020 | AirbusEstimated reading time: 1 minute

Airbus has revealed MAVERIC (Model Aircraft for Validation and Experimentation of Robust Innovative Controls) its “blended wing body” scale model technological demonstrator.
At 2 metres long and 3.2 metres wide, with a surface area of about 2.25m², MAVERIC features a disruptive aircraft design, that has the potential to reduce fuel consumption by up to 20% compared to current single-aisle aircraft. The “blended wing body” configuration also opens up new possibilities for propulsion systems type and integration, as well as a versatile cabin for a totally new on-board passenger experience.
Launched in 2017, MAVERIC first took to the skies in June 2019. Since then the flight-test campaign has been on-going and will continue until the end of Q2 2020.
“Airbus is leveraging emerging technologies to pioneer the future of flight. By testing disruptive aircraft configurations, Airbus is able to evaluate their potential as viable future products,” said Jean-Brice Dumont, EVP Engineering Airbus. “Although there is no specific time line for entry-into-service, this technological demonstrator could be instrumental in bringing about change in commercial aircraft architectures for an environmentally sustainable future for the aviation industry.”
Airbus is using its core strengths and capabilities of engineering and manufacturing, in close collaboration with an extended innovation ecosystem, to accelerate traditional research and development cycles. By doing this Airbus is able to achieve proof of concepts, at a convincing scale and speed, thereby driving forward maturity and increasing their value.
Through AirbusUpNext, a research programme, Airbus is currently working on a number of demonstrator projects in parallel; E-FAN X (hybrid-electric propulsion), fello’fly (v-shaped “formation” flight) and ATTOL (Autonomous Taxi Take-Off & Landing).
Suggested Items
Reflections and Priorities: An Update to I-Connect007 Readers
06/24/2025 | Marcy LaRont, I-Connect007The electronics and manufacturing industry is evolving rapidly—with new technologies, deeper global connections, and a growing drive toward sustainability. To reflect these changes and our place in this dynamic space, we’re refreshing our brand.
AT&S Opens Europe’s First IC Substrate Plant and Competence Center in Leoben
06/04/2025 | AT&SAT&S officially inaugurated its new Competence Center for R&D and IC Substrate Production on Tuesday with a high-profile ceremony at its headquarters in Leoben-Hinterberg. Numerous high-ranking guests from politics, industry, and the media were welcomed to the event and given an exclusive tour of the 11,000-square-meter site of cutting-edge technology. With an investment of more than € 500 million,
Meyer Burger Shuts Down Solar Module Production, Lays Off 282 Employees in the U.S.
05/30/2025 | Meyer BurgerMeyer Burger Technology AG is forced to stop its solar module production in the U.S., which is still ramping up, due to a lack of funds. On May 29, 2025, all 282 remaining employees at the Goodyear, Arizona, site received their notices of termination. Production with an annual capacity of 1.4 gigawatts was shut down immediately.
Dan’s Biz Bookshelf: ‘The Future of Sales'
05/29/2025 | Dan Beaulieu -- Column: Dan's Biz BookshelfSales is an art and a science, and if John Asher had his way, it would be a well-oiled machine fueled by cutting-edge tools and techniques. In his book "The Future of Sales: The 50+ Techniques, Tools, and Processes Used by Elite Salespeople," Asher’s roadmap to this future blends human ingenuity with technological precision. Consider it a wake-up call if you’re in sales and haven’t read this book yet.
Celebrating Leadership, Legacy and the Future of Southeast Asia’s Semiconductor Industry
05/26/2025 | SEMIOn the occasion of its 30th anniversary, SEMICON Southeast Asia (SEA) 2025 hosted the Night of Leaders, a dinner and awards ceremony that honoured individuals shaping the region’s semiconductor future.