BAE Systems to Power up to 600 Buses in Ireland With Emission Reducing Electric Propulsion Systems
February 27, 2020 | BAE SystemsEstimated reading time: 1 minute

BAE Systems, a world leader in electric propulsion, has been selected by Alexander Dennis Limited (ADL) and the Republic of Ireland's National Transport Authority (NTA) to supply up to 600 electric power and propulsion systems for its new fleet of buses in Ireland. The selection includes an initial order for 100 systems.
"The Series-ER system is highly reliable and an important step to full electrification for Ireland," said Steve Trichka, vice president and general manager of Power & Propulsion Solutions at BAE Systems. "This technology gets Ireland closer to zero emission operations, reducing fuel consumption and improving air quality in the areas where its people live, work, and visit."
With Series-ER, the buses will be able to drive on clean electric power through designated low and zero emission zones. The system uses global positioning software to enable the buses to run in full electric mode when they enter the zones. The buses switch to battery power when the engine is off—eliminating the release of exhaust emissions in populated areas such as near schools, hospitals, and tourist attractions.
The technology is part of the company's 20-plus years of experience developing and integrating electric propulsion systems and accessories for transit buses. Series-ER builds on that foundation, maximizing the efficiency of the energy storage system. With increased battery capacity, the system provides zero emission travel without the need for the bus to stop and recharge. This also eliminates the need for cities to add costly charging infrastructure.
BAE Systems' Series-ER technology is powering more than 200 buses across the globe, including major cities such as Brighton, Boston and San Francisco. For more information, visit: www.gettozero.com.
Suggested Items
2025 ASEAN IT Spending Growth Slows to 5.9% as AI-Powered IT Expansion Encounters Post-Boom Normalization
06/26/2025 | IDCAccording to the IDC Worldwide Black Book: Live Edition, IT spending across ASEAN is projected to grow by 5.9% in 2025 — down from a robust 15.0% in 2024.
DownStream Acquisition Fits Siemens’ ‘Left-Shift’ Model
06/26/2025 | Andy Shaughnessy, I-Connect007I recently spoke to DownStream Technologies founder Joe Clark about the company’s acquisition by Siemens. We were later joined by A.J. Incorvaia, Siemens’ senior VP of electronic board systems. Joe discussed how he, Rick Almeida, and Ken Tepper launched the company in the months after 9/11 and how the acquisition came about. A.J. provides some background on the acquisition and explains why the companies’ tools are complementary.
United Electronics Corporation Advances Manufacturing Capabilities with Schmoll MDI-ST Imaging Equipment
06/24/2025 | United Electronics CorporationUnited Electronics Corporation has successfully installed the advanced Schmoll MDI-ST (XL) imaging equipment at their advanced printed circuit board facility. This significant technology investment represents a continued commitment to delivering superior products and maintaining their position as an industry leader in precision PCB manufacturing.
Insulectro & Dupont Host Technology Symposium at Silicon Valley Technology Center June 25
06/22/2025 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, and DuPont, a major manufacturer of flex laminates and chemistry, invite fabricators, OEMS, designers, and engineers to attend an Innovation Symposium – Unlock the Power - this Wednesday, June 25, at DuPont’s Silicon Valley Technology Center in Sunnyvale, CA.
OKI, NTT Innovative Devices Establish Mass Production Technology for High-Power Terahertz Devices by Heterogeneous Material Bonding
06/21/2025 | BUSINESS WIREOKI, in collaboration with NTT Innovative Devices Corporation, has established mass production technology for high-power terahertz devices using crystal film bonding (CFB) technology for heterogeneous material bonding to bond indium phosphide (InP)-based uni-traveling carrier photodiodes (UTC-PD) onto silicon carbide (SiC) with excellent heat dissipation characteristics for improved bonding yields.