Royal Flex Circuits Supports the Production of Ventilators for Medtronic
March 25, 2020 | Royal Flex CircuitsEstimated reading time: 1 minute
Companies across the nation are ramping up their production lines to increase the ventilator capacity in the United States and around the world. But not all companies are qualified to perform the work. Only a fraction of the approximately 100 PCB manufacturing companies in the United States is capable of quickly fabricating and assembling the necessary circuit boards.
Royal Flex Circuits, in Santa Fe Springs, California is uniquely positioned to help out in the crisis. Its new production facility, less than a year old, features the latest machinery, hardware, and production methods. The company has an inventory of copper-clad cores and prepreg, allowing it to start production as soon as the design files arrived from ventilator manufacturers.
Victor Hemingway, President of Royal Flex Circuits, said, “We have been producing circuit boards for Medtronic ventilators for over 10 years. We have extended production hours and now have two shifts of engineers and production-line employees making the circuit boards that control ventilators. Our employees are putting in long hours, but we are so proud to be helping in this time of great need.”
Throughout the COVID-19 epidemic, as many as “960,000 Americans will require ventilatory support” (US Resource Availability for COVID-19, Society of Critical Care Medicine, March 2020). A survey in 2009 identified approximately 160,000 ventilators in hospitals with another 12,700 in the Strategic National Stockpile (Worst -Case Estimates for US Coronovirus Deaths, New York Times, March 13, 2020). The large disparity between those two numbers means that potentially hundreds of thousands of Americans will not have the medical resources they need.
Royal Flex Circuits manufactures rigid, rigid-flex, and flexible printed circuits. “Fabricating and assembling flexible printed circuit boards is a very complex process that requires a fair amount of materials, a lot of labor and great attention to detail,” said Hemingway. “But done correctly, the net result is a product that helps saves lives.”
Suggested Items
DuPont Showcases AI Innovations Featuring Advanced Interconnects at 2024 International Electronic Circuits Exhibition
05/13/2024 | DuPontDuPont announced it will showcase its comprehensive range of advanced circuit materials and solutions at the 2024 International Electronic Circuits Exhibition in Shanghai. With a product portfolio that includes fine line, signal integrity, power and thermal management, DuPont will exhibit at Booth #8L06 at the National Exhibition and Convention Center (NECC) from May 13 to 15.
MKS’ Atotech to Participate in ECTC
05/10/2024 | MKS’ AtotechAt this year’s 74th IEEE Electronic Components and Technology Conference (ECTC), MKS’ Atotech will present and demonstrate its latest product and service innovations.
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.