SMT Perspectives and Prospects: Warren Buffett’s Perpetual Wisdom, Part 1
Standard of Excellence: Training Your Team to Excel in Customer Service
Smart Automation: What Industry 4.0 Means for Mid-sized Electronics Manufacturing
Techsil, Panacol Offers Adhesive for Filament Winding Processes
October 15, 2020 | TechsilEstimated reading time: 1 minute
The newly developed Vitralit® UD 1405 adhesive is an innovative adhesive system for fibre and filament winding. For high efficiency, Vitralit® UD 1405 can be applied during the winding process and immediately cured with high intensity LED curing systems. This adhesive and curing system is ideal for Carbon or Glass Fibre filament winding associated with Carbon Fibre Reinforced Polymer (CFRP) or Glass Fibre Reinforced Polymer (GFRP) manufacturing processes.
Vitralit® UD 1405 can be used to wrap components such as hybrid rotor shafts for electric motors and high-voltage surge arresters. The adhesive-coated fibre-reinforced windings can be then be quickly cured with UV/visible light. This innovative winding process is extremely space and time-saving, and can produce significant processing cost savings.
Available through Techsil in the UK, Panacol’s Vitralit® UD 1405 is a transparent, solvent-free, one-component epoxy. Due to its low viscosity, Vitralit® UD 1405 has very good wetting properties. It can be cured in seconds by irradiation with UV (365nm) or Visible (405nm) light wavelengths. Depending on the fibre material and the wavelength used, layer thicknesses of several millimetres can be achieved exclusively by UV/Visible light curing. This epoxy can also be thermally cured after UV exposure to ensure that a complete cure is secured in areas shadowed from the UV light. For example, fibres or filaments can first be pulled through an adhesive bath, then wound onto the rotor or respective cylinder, and cured with UV or visible light. A secondary thermal cure will ensure that the layers of coated windings below the surface become fully cured.
Techsil can also offer the most efficient UV curing system for fibre and filament winding processes, the LED Powerline AC/IC 820 HP from UV specialist Hönle. With intensities of up to 16,000 mW/cm², this LED system ensures very fast curing. Its light emission window is available in two standard sizes, 82 mm x 20 mm and 122 mm x 20 mm, which can be extended without gaps by stringing together multiple modules.
After curing, Vitralit® UD 1405 is electrically insulating, shows minimal shrinkage and remains resistant at temperatures from -40° to 180°C. A glass transition temperature of over 130°C ensures reliable performance even under dynamic load at elevated temperatures.
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
Teramount Raises $50M to Address Growing Demand for AI Infrastructure Optical Connectivity
07/31/2025 | PRNewswireTeramount, the leader in scalable fiber-to-chip interconnect solutions for AI, data centers and advanced computing, today announced it has raised $50 million in financing led by new investor Koch Disruptive Technologies (KDT). Existing investors Grove Ventures and several new strategic investors, including AMD Ventures, Hitachi Ventures, Samsung Catalyst Fund and Wistron, joined the round.
FlashPCB Enhances SMT Production Line with Heller 1809 Reflow Oven and KIC ProBot
07/31/2025 | FlashPCBFlashPCB, a leading provider of quick-turn PCB assembly, has expanded its surface mount production capabilities with the installation of a Heller 1809 MKII reflow oven paired with the KIC ProBot automatic profiling system. This addition supports FlashPCB’s goal of achieving faster throughput, higher quality assurance, and consistent process control across a wide range of PCB builds.
BAE Systems Receives $12 Million Contract from L3Harris
07/25/2025 | BAE SystemsBAE Systems has received a $12 million contract from L3Harris to support the modification of two Gulfstream G550 aircraft into airborne electronic attack (EA) platforms for the Italian Air Force.
Southwest Antennas Secures First Major European Order for their Permanent Mounting Kits
07/24/2025 | Southwest AntennasSouthwest Antennas is proud to announce the receipt of its first major European order for the company’s Permanent Mounting Kits, marking a significant milestone in its international expansion efforts.
SCS Launches New G4 Spin Coater and Upgrades 6800 Series with Improved Design Features
07/23/2025 | SCSSpecialty Coating Systems (SCS) is pleased to announce the launch of its next-generation G4 Spin Coater, delivering enhanced control, connectivity and usability for research, development and small-scale production environments.