-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueAdvanced Packaging and Stackup Design
This month, our expert contributors discuss the impact of advanced packaging on stackup design—from SI and DFM challenges through the variety of material tradeoffs that designers must contend with in HDI and UHDI.
Rules of Thumb
This month, we delve into rules of thumb—which ones work, which ones should be avoided. Rules of thumb are everywhere, but there may be hundreds of rules of thumb for PCB design. How do we separate the wheat from the chaff, so to speak?
Partial HDI
Our expert contributors provide a complete, detailed view of partial HDI this month. Most experienced PCB designers can start using this approach right away, but you need to know these tips, tricks and techniques first.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - design007 Magazine
L3Harris Technologies Demonstrates Antenna Technology for US Space Force Satellite Communications
January 13, 2021 | Business WireEstimated reading time: 1 minute
L3Harris Technologies has successfully completed a technology demonstration, under a Defense Innovation Unit prototype contract, for the U.S. Space Force satellite communication system to improve communications with the agency’s growing number of satellites.
L3Harris developed a Multi-Band Multi-Mission (MBMM) phased array ground antenna system and integrated it with the Space Force’s Satellite Communication Network system in order to demonstrate multiple simultaneous satellite contacts. Traditional parabolic or radio antennas can contact only one satellite at a time.
The MBMM system’s all-digital architecture established 16 simultaneous contacts during the demonstration. The system can scale up to support hundreds of concurrent satellite connections from a single phased array antenna system, reducing the physical footprint needed for ground antennas and lowering the infrastructure cost per satellite contact.
“L3Harris developed an all-digital phased array antenna technology to meet the enormous ground system capacity demands created by the increasing number of satellite missions,” said Ed Zoiss, President, Space and Airborne Systems, L3Harris. “This successful demonstration from L3Harris readies our nation with a capable and affordable advanced satellite communications approach today for the further proliferation of satellites in the near future."
The L3Harris demonstration successfully confirmed live contacts with Space Force satellites across multiple orbital regimes at Schriever Air Force Base in Colorado.
“The MBMM demonstrations were a complete success that showcased the advancements in phased array technology and relevance for satellite command and control with live DOD systems. It has reinvigorated interest in the MBMM program as a key part of the overall space architecture,” said Col. Wallace “Rhett” Turnbull III, Director, Cross Mission Ground and Communications Enterprise, Space and Missile Systems Center. “Capabilities like those recently demonstrated may play an important role in meeting the growing demand for satellite control capacity by providing more affordable and resilient access to Space Force satellite systems.”
L3Harris performed the successful demonstration with support from Kratos Defense & Security Solutions, Inc. and Mercury Systems.
Suggested Items
Two Additional Boeing O3b mPOWER Satellites Successfully Communicating in Space
12/23/2024 | BoeingTwo more Boeing-built O3b mPOWER satellites are sending and receiving signals in space after launching from the Kennedy Space Center, Florida at 5:26 p.m.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
Saab Receives Giraffe 4A Radar Order for the U.S. Air Forces in Europe
12/17/2024 | SaabSaab has received an order from BAE Systems in support of the U.S. Air Forces in Europe for multiple Giraffe 4A radar systems. The contract value is approximately $48M (525 MSEK). Deliveries will start in 2027.
Honeywell, Sino Jet Expand Collaboration With New Memorandum Of Understanding
12/17/2024 | HoneywellHoneywell announced that it has signed a memorandum of understanding (MoU) with Sino Jet at the Middle East and North Africa Business Aviation Association (MEBAA) show.
INVISIO Secures SEK 115 Million Order for Intercom and Dismounted Soldier Systems
12/16/2024 | INVISIOINVISIO has received a significant order from an existing European customer for its Intercom and Dismounted Soldier systems. Deliveries are set to commence immediately and are expected to be completed by Q1 2025.