It's Only Common Sense: Leveraging AI in Your Sales Strategy
Dan’s Biz Bookshelf: 'Hidden Potential: The Science of Achieving Greater Things'
Trouble in Your Tank: Minimizing Small-via Defects for High-reliability PCBs
New LPKF CuttingMaster 2122 Improves Depaneling Efficiency
June 24, 2021 | LPKFEstimated reading time: 1 minute
LPKF has enhanced the performance of the proven and popular LPKF CuttingMaster depaneling system even more with a newly developed laser source. Initial applications demonstrate a significantly higher cutting speed and, as a result, an up to 25% higher output. For users, this yields a whole new dimension for improving efficiency in this price-to-performance range. It gives PCB manufacturers the full advantages of laser technology for the price of a milling machine.
Drawing on extensive expertise in both laser technology and depaneling, LPKF’s engineers have developed a special laser source that is now used in the latest addition to the CuttingMaster platform. It delivers precision and speed with high reliability. The time needed by the predecessor machine to cut a comparison sample in a 0.8 mm FR4 board with “FastCut” was already impressive at 7.3 seconds, but the new LPKF CuttingMaster 2122 does the job in just 5.9 seconds. That's a difference of nearly 20%, and it can even be more than that by using CleanCut technology. All this is achieved with the same invest. In the cutting of coverlayers, too, the new laser system achieves a considerable improvement for the price-to-performance ratio. Compared with the prior state of the art, the LPKF CuttingMaster 2122 makes it possible for users to achieve a whole new level of performance and added value. With it, LPKF combines the advantages of laser technology in a particularly cost-efficient system.
All laser machines of the LPKF CuttingMaster 2000 series are ideally suited to cutting of flexible, flex-rigid, and rigid PCBs – made of, for example, FR4, polyimide, or ceramics. With laser cutting, no mechanical or appreciable thermal stresses are introduced. Therefore, even sensitive substrates can be processed with high precision. Ablation products are directly extracted. The cutting channels are just a few µm wide for optimal panel area utilization.
Processing by the LPKF CuttingMaster is completely software-controlled. The layout files can be transferred to the machine with a click of the mouse – no lengthy changeover or prior elaborate tool manufacturing is required. Processing parameters and laser paths are adapted to take into account varying materials or cutting contours directly. The high level of automation of the compact system, which can be selected modularly depending on the application, results in high throughput and high repeatability.
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
08/29/2025 | Nolan Johnson, I-Connect007This week, we bring you Global Electronics Association’s Chris Mitchell’s government relations column on—you guessed it—trade deals. TTM is balancing its facilities between East and West. The Global Electronics Association released July numbers for North American PCB shipments, and the news is good. Meanwhile, the corresponding report for EMS might seem like bad news, but that’s misleading. Be sure to look deeper for the rest of the story. Finally, for a bit space-science palate cleansing, I’m sharing news of the latest launch of NASA’s X-37B.
ICZOOM Launches PCB & SMT Services to Strengthen One-Stop Electronics Industry Solution at IIC Shenzhen 2025
08/28/2025 | PRNewswireICZOOM Group Inc., a B2B electronic component products e-commerce platform, successfully exhibited at the 2025 International Integrated Circuit & Component Exhibition and Conference (IIC Shenzhen 2025) held from August 26 to 28 at the Shenzhen Convention & Exhibition Center in Futian District.
AT&S Fuels Future Innovation with 'Young Wilds' Program
08/28/2025 | AT&SToday’s ideas are tomorrow’s innovations: Following a successful debut in the financial year 2024/25, the “Young Wilds” program offers ambitious young professionals at AT&S the opportunity to take on responsibility and accelerate their personal and professional growth.
North American PCB Industry Shipments Up 20.7 Percent in July
08/27/2025 | Global Electronics AssociationThe Global Electronics Association announced today the July 2025 findings from its North American Printed Circuit Board (PCB) Statistical Program. The book-to-bill ratio stands at 1.00. Total North American PCB shipments in July 2025 were up 20.7% compared to the same month last year.
Mastering PCB Floor Planning
08/28/2025 | Stephen V. Chavez, Siemens EDAPlacement of PCB components is far more than just fitting components onto a board. It’s a strategic and critical foundational step, often called “floor planning,” that profoundly impacts the board’s performance, reliability, manufacturability, and cost. Floor planning ties into the solvability perspective, with performance and manufacturability being the other two competing perspectives for addressing and achieving success in PCB design.