The Marketing Minute: If Your Marketing Budget Gets Cut in Half, Then What?
Punching Out: How Are the Big Boys in Electronics Doing?
It’s Only Common Sense: Complexity Is the Enemy of Profit
Summit Interconnect – Toronto Earns IPC-1791, QML as Trusted Electronics Fabricator
December 14, 2021 | Summit Interconnect, Inc.Estimated reading time: 2 minutes
IPC's Validation Services Program has awarded an IPC-1791, Trusted Electronics Fabricator Requirements Qualified Manufacturers Listing (QML) to a Summit Interconnect printed circuit board (PCB) manufacturing facility located in Toronto, Ontario, Canada. This is the first non-U.S. based facility to achieve the IPC-1791 QML.
Following initial audits by IPC, the Toronto facility passed stringent Type 2 fabricator requirements, helping to optimize product quality, reliability, and consistency across the entire manufacturing operations, earning a spot-on IPC’s global network of rigorously vetted, trusted sources. The Toronto facility joins three other Summit Interconnect facilities (Orange, Anaheim, and Santa Clara, Calif.) which were awarded the IPC-1791 QML in October 2021.
Requirements for certification and QML listing to IPC-1791 includes product and quality system, supply chain risk management system (SCRM), security system including compliance to NIST SP 800-171, Export Control Laws (ITAR and EAR), and a chain of custody system (ChoC) review.
Shane Whiteside, president and CEO of Summit Interconnect commented, “Summit Toronto is the first non-U.S. based PCB manufacturer to receive IPC-1791 certification. This trusted fabricator certification augments our existing AS9100 certification, NADCAP accreditation, DD2345 Joint Certification Program status, and ITAR 126.5 compliance in Toronto. Summit is committed to secure printed circuit board manufacturing to support the increasing needs of our U.S. and allied military customers. These certifications coupled with the capabilities and capacity available in Toronto underscore our commitment to being the trusted PCB supplier of choice for military systems and platforms.”
IPC's Validation Services QPL/QML Program was developed to promote supply chain verification and recognition. It also provides auditing and qualification of electronics companies' products and identifies processes which conform to IPC standards. The IPC-1791 QML verifies security systems and recognizes companies for either trusted electronic designer, fabricator, or assembler ensuring a high level of integrity.
"IPC's Validation Services Audit Programs uniquely provide technical and in-depth assessments of products and processes in accordance with IPC standards," said Randy Cherry, IPC director of Validation Services. "We are pleased to especially recognize Summit Interconnect Toronto, Ontario on becoming members of IPC's network of trusted QML suppliers."
Share on:
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/08/2026 | Marcy LaRont, I-Connect007This week, I’ve selected some outstanding interviews that you’ll want to take note of. First, is a roundtable discussion featuring three dynamic industry cybersecurity experts. Please watch this important discussion that affects us all. Following that, I spotlight the IPC-2581 Consortium, which explains why IPC-2581 is the standard to replace Gerber data for manufacturing. Next, I am including my interview with PCBAA and AAM, who collaborated to release a short documentary on U.S. PCB manufacturing.
Global Electronics Association to Testify at the Office of the U.S. Trade Representative Panel on Section 301 Structural Excess Capacity
05/08/2026 | Global Electronics AssociationChris Mitchell, Vice President for Global Government Relations at the Global Electronics Association, will testify before the Office of the U.S. Trade Representative (USTR) Panel on Section 301 Structural Excess Capacity on Friday, May 8.
Hall of Fame Spotlight Series: Highlighting Karen McConnell
05/07/2026 | Dan Feinberg, I-Connect007In 2021, Karen McConnell was awarded the Raymond E. Pritchard Hall of Fame award in recognition of her contributions to the Association and the electronics industry. As a senior staff member and CAD/CAM engineer at Northrop Grumman Enterprise Services, her primary responsibility was to develop a common, shared EDM (Electronic Document Management) library to support the electrical and PCB design tool initiatives across Northrop Grumman Mission Systems.
A Necessary Shift From Gerber to IPC-2581
05/07/2026 | Tracy Riggan, Global Electronics AssociationIPC-2581 is an open, vendor-neutral data exchange standard developed by the Global Electronics Association to streamline the exchange of PCB design information across fabrication, assembly, and test. It replaces multiple legacy formats—including industry standards, Gerber, and ODB++—with a single, comprehensive, XML-based dataset that captures all manufacturing details.
TTC-LLC and TTCI: Smarter Training, Stronger Test at PCB East 2026
04/27/2026 | The Test Connection Inc.The Training Connection LLC (TTC-LLC) and The Test Connection, Inc. (TTCI) will be exhibiting together at PCB East 2026, taking place April 28–May 1 at the DCU Convention Center in Worcester, Massachusetts. Attendees can find both teams at Booth #103 during the main exhibition day on Wednesday, April 29.