Gelatin Foams Show Unexpected Ultralong Organic Phosphorescence for Optical Applications
January 3, 2022 | RIKENEstimated reading time: 2 minutes
Strong, lightweight and biocompatible foams glow in the dark when ultraviolet light is shone on them, RIKEN chemists have discovered. This phosphorescence could have diverse applications, such as imaging biological samples under the microscope.
Phosphorescent materials absorb high-energy light and then gradually release the energy as light of a longer wavelength. This afterglow can persist for minutes or even hours—much longer than is possible for fluorescent materials.
Inorganic compounds are widely used as phosphorescent materials, but some carbon-based, organic materials can also show a persistent glow, known as ultralong organic phosphorescence. Organic materials are potentially easier to manufacture than inorganic phosphors, and researchers can fine-tune the color and duration of their glow by altering their molecular structures, tailoring them for possible applications including anti-counterfeiting and optical sensing. But ultralong organic phosphorescence materials tend to be brittle and contain toxic components, which has limited their practical use.
Now, Yasuhiro Ishida at the RIKEN Center for Emergent Matter Science and colleagues have discovered that gelatin, a mixture of peptides and proteins used as a gelling agent in food and medicines, can be turned into ultralong organic phosphorescence materials that are strong.
The researchers mixed gelatin with water to form hydrogels, and then freeze-dried them to create porous foams. After testing various gelatin concentrations and freezing conditions, the researchers found that chilling the mixture to –10 degrees Celsius produced the strongest foam, which was capable of withstanding high pressures. “Despite being 80% air, a piece of foam the size of a sugar cube can support a 40 kilogram weight,” says Ishida. Electron microscopy revealed that the foams had very regular structures, with pores of similar shapes and sizes.
After the team shone ultraviolet light on the foams, they glowed yellow-green for several seconds. “I was so surprised when my student Suzhi Cai serendipitously found that gelatin foams show strong ultralong organic phosphorescence,” recalls Ishida. “Such strong ultralong organic phosphorescence could never be imagined based on gelatin’s molecular structure.”
The researchers found that clusters of chemical groups called carbonyls were responsible for the foams’ ultralong organic phosphorescence. Their phosphorescence lifetime decreased after exposure to air, because moisture disrupted these carbonyl clusters.
The team made similar foams from different materials, including sodium polyacrylate and poly(acrylamide). Although not as strong as the gelatin foams, these foams all showed ultralong organic phosphorescence activity, glowing blue or deep green. Mixing gelatin with polymers called PVA and PVP also made them phosphoresce.
The gelatin foams are non-toxic, and Ishida now hopes to develop them as eco-friendly materials for optical sensors.
Suggested Items
Indium Corporation Expert to Present on Automotive and Industrial Solder Bonding Solutions at Global Electronics Association Workshop
06/26/2025 | IndiumIndium Corporation Principal Engineer, Advanced Materials, Andy Mackie, Ph.D., MSc, will deliver a technical presentation on innovative solder bonding solutions for automotive and industrial applications at the Global Electronics A
Gorilla Circuits Elevates PCB Precision with Schmoll’s Optiflex II Alignment System
06/23/2025 | Schmoll MaschinenGorilla Circuits, a leading PCB manufacturer based in Silicon Valley, has enhanced its production capabilities with the addition of Schmoll Maschinen’s Optiflex II Post-Etch Punch system—bringing a new level of precision to multilayer board fabrication.
Day 1: Cutting Edge Insights at the EIPC Summer Conference
06/17/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) Summer Conference took place this year in Edinburgh, Scotland, June 3-4. This is the second of three articles on the conference. The other two cover the keynote speeches and Day 2 of the technical conference. Below is a recap of the first day’s sessions.
American Made Advocacy: Supporting the Entire PCB Ecosystem—Materials to OEMs
06/17/2025 | Shane Whiteside -- Column: American Made AdvocacyWith the addition of RTX to PCBAA’s membership roster, we now represent the interests of companies in the entire PCB ecosystem. From material providers to OEMs, the insights of our collective members help us educate, advocate, and support legislation and policy favorable to America’s microelectronics manufacturers. The industry veterans who lead these companies provide valuable perspective, and their accumulated wisdom makes us an even stronger association.
Ventec Strengthens Commitment to Halogen-Free PCB Manufacturing in Europe
06/11/2025 | Ventec International GroupVentec International Group, the PCB materials innovator, manufacturer, supplier and one-stop shop for copper clad laminates, prepregs, as well as process consumables and PCB manufacturing equipment has established volume inventory of halogen-free FR4.1 and FR15.1 PCB materials at its European hub in Germany.