DOCOMO Develops Solution to Create High-frequency Mobile Cells
January 18, 2022 | ACN NewswireEstimated reading time: 2 minutes
NTT DOCOMO, INC. announced that it has developed an antenna system capable of creating a high-frequency mobile communication cell when a small (roughly one cubic centimeter) piece of plastic is placed on top of a dielectric waveguide. The solid plastic cube serves as an antenna by creating a "leak" from the cable to propagate signals up to several tens of meters. DOCOMO successfully tested the system with an ultra-high-frequency 60 GHz radio signal, similar to those expected to be used in future 6G networks.
DOCOMO envisions its simple, low-cost solution being used to create instant mobile environments in indoor areas not reachable with highly directional high-frequency signals propagated by outdoor base stations.
This system, named "Drop-n-Prop Antenna," takes advantage of the physical phenomenon of radio waves leaking (propagating) from the contact point created by placing ("dropping") a small piece of plastic on top of a dielectric waveguide carrying the signal.
In the trial, DOCOMO constructed a communication area by running a rod-shaped dielectric waveguide made of polytetrafluoroethylene into an indoor area that was inaccessible to external mobile signals. The waveguide was embedded in a length of polystyrene-foam board with one side barely exposed to allow contact with antennas. Multiple communication cells were created simultaneously by placing antennas along various parts of the waveguide. Signal coverage and direction were controlled by changing the material, shape and positioning of the antennas.
Both millimeter waves (28 GHz) for 5G and higher frequencies (60 GHz, etc.) expected to be used for 6G travel in very straight (rectilinear) lines. It is difficult for such waves to reach devices not in a base station's direct line of sight, or if the signals are blocked by surrounding obstacles (walls, equipment, etc.). DOCOMO's simple, low-cost antenna system being announced today merely requires a rod-shaped dielectric waveguide to be run into an area and then embedded in the floors, walls, ceilings, furniture or work surfaces. Communication areas can be constructed easily and unobtrusively in offices, factories, etc. and reconfigured quickly and flexibly just by moving the antenna(s) as required.
The new antenna system also will help to lower energy use by efficiently propagating signals to desired areas only, thereby eliminating wasteful usage of power to propagate signals in areas where communication is not required.
DOCOMO will begin verifying a system using 28 GHz 5G radio signals in the first half of fiscal 2022 starting this April, aiming to introduce a commercial version of its new antenna system as soon as possible.
Suggested Items
Jaltek Forge Partnership to Target New ‘Agritech’ Business
07/26/2024 | JaltekJaltek is thrilled to announce it has signed a new partnership that will give ‘agritech’ innovators seeking contract manufacturing and electronics solutions a single point of contact.
iNEMI Packaging Tech Topic Webinar: Equipment Capabilities and Challenges to Support Advanced Packaging Trends
07/26/2024 | iNEMIModern day computing needs, notably AI/machine learning and high-performance computing, along with their subsequent memory and I/O requirements, are fueling an increased demand for semiconductor devices with higher performance, lower power consumption and latency as well as reduced footprint.
Ventec Giga Solutions & Hi-Print Team up to Launch World's First 3-Color Inkjet Printing Solution
07/24/2024 | Ventec International GroupVentec Giga Solutions, Ventec’s value-added PCB equipment division, and leading inkjet printer manufacturer Hi-Print have teamed up to launch the industry’s most cutting-edge inkjet printer for solder mask technology.
Dymax Expands Core Market Focus to Include the Energy Sector
07/24/2024 | DymaxDymax, a leading manufacturer of rapid curing materials and equipment, announces a curated lineup of light-curable adhesives and coatings designed to meet the complex assembly needs of stationary energy storage systems such as industrial gas turbines (IGTs) and various types of fuel cells and electrolyzers including Solid Oxide (SOFC) and Proton Exchange Membrane (PEMFC).
BOOK EXCERPT: The Printed Circuit Assembler’s Guide to... Encapsulating Sustainability for Electronics, Chapter 3
07/24/2024 | I-Connect007 Editorial TeamThis chapter provides an in-depth analysis of general-purpose and specialist encapsulation resins for electronic applications. Also covered are properties, testing methods, suitability for harsh environments, and thermal management of high-power density electronic devices.