Rosalind Franklin Mars Rover Passes Latest Tests Ahead of September Launch
January 19, 2022 | ESAEstimated reading time: 2 minutes
The European Space Agency (ESA) rover starts the year with months of successful maintenance and functional tests behind it. All its instruments are go for flight, with some minor tuning left to complete this month.
Sue Horne, Head of Space Exploration at the UK Space Agency, said, "The Rosalind Franklin rover showcases some of the best of the UK’s space sector and its search for signs of life on Mars will inspire future generations of scientists and engineers. It’s very exciting to see this flagship mission pass the latest tests and see the fruition of many years’ hard work as we look forward to the launch later this year."
The rover was built in Stevenage by Airbus, while the UCL Mullard Space Science Laboratory led on a key instrument known as the PanCam, a high-resolution 3D camera which will look at the terrain and rocks to try to detect signs of life.
The University of Leicester, Teledyne e2v and STFC RAL Space worked on the Raman Spectrometer which will use laser light to identify particular minerals and organic compounds and search for life.
Pietro Baglioni, ESA’s ExoMars rover team leader, said, "The rover is ready, and together with the recent drop test success for the parachutes, we are positive to be in time for the September launch date."
The Rosalind Franklin rover is currently in an ultra-clean room at the Thales Alenia Space premises in Turin, Italy, right by its travelling companion, the Kazachok landing platform. Following a final review in April, all the components of the spacecraft – rover, descent module, landing platform and carrier – will move to the launch site in Baikonur, Kazakhstan, to prepare for lift-off.
Following the nerve-wracking descent to the surface of Mars, a long-awaited moment in the ExoMars mission will be when Rosalind leaves the landing platform and drives onto the martian soil for the first time.
In preparation for this, the twin of the Rosalind Franklin rover successfully left the platform during recent tests in a Mars terrain simulator at the ALTEC premises in Turin.
While the driving during these exercises takes about 15 minutes, the whole process will last a few Martian days. After landing, the rover will be busy for over a week unfolding its solar panels, wheels and deploying the mast, among other checkouts.
The ExoMars twin rover, until now known as the Ground Test Model, has a new name: Amalia, named after Professor Amalia Ercoli Finzi, a renowned astrophysicist with vast experience in spaceflight dynamics.
Amalia was the first woman to graduate in aeronautical engineering in Italy, and besides serving as a scientific advisor for ESA and NASA, she designed the drill on Rosetta’s lander Philae and strongly pushed for the development of the ExoMars drill 20 years ago.
Engineers are using the Amalia rover to recreate different scenarios and help them take decisions that will keep Rosalind safe in the challenging environment of Mars. The model is fully representative of what the rover will be able to do on the Red Planet.
Amalia has so far demonstrated drilling soil samples down to 1.7 metres and operate all the instruments while sending scientific data to the Rover Operations Control Centre (ROCC), the operational hub that will orchestrate the roaming of the European-built rover on Mars.
The ESA-Roscosmos Trace Gas Orbiter is waiting for the arrival of ExoMars to the Red Planet. In addition to its own science mission, the orbiter relays data from NASA’s Perseverance rover.
Suggested Items
Excellon Automation to Exhibit at AEMS 2024
09/25/2024 | Excellon AutomationExcellon Automation will be displaying at the Anaheim Electronics and Manufacturing Show on October 2nd and 3rd at the Anaheim Convention Center in Anaheim, California.
Cincoze Rugged Embedded Computers: Driving Innovation in Edge AI Applications
09/12/2024 | BUSINESS WIRERugged embedded computer brand—Cincoze, recognizes the huge application opportunities brought on by the edge AI trend and has five series across two product lines to fully meet the extreme performance, reliability, and environmental adaptability requirements of edge AI applications.
Advancements in Drill Bit Technology
08/29/2024 | Marcy LaRont, PCB007 MagazineIn this interview with Alex Girardot of Perfect Point Precision Carbide Tools, we explore the pioneering advancements in drill bit technology supporting high-tech fabrication. Alex leverages his 15 years of expertise in the PCB industry to discuss the critical role of coating technology in enhancing drill bit performance. This technological leap increases accuracy, especially in high aspect ratio builds, and nearly eliminates drill bit breakage.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
08/02/2024 | Andy Shaughnessy, I-Connect007After getting stuck in an airport during the Crowdstrike outage, our colleague Nolan Johnson has a review of the first-ever THECA trade show in Bangkok, Thailand. We have a column by Matt Stevenson on drilling optimization, and an interview with Schmoll America President Kurt Palmer about what it takes to thrive in this industry. We have an article by SMTA’s Tara Dunn that focuses on the organization’s educational offerings, and news about All Flex joining the PCBAA.
Connect the Dots: Navigating the Intricacies of PCB Drilling
08/01/2024 | Matt Stevenson -- Column: Connect the DotsWelcome to another leg on my quest to share best practices associated with designing PCBs for the reality of manufacturing. In a recent episode of the On the Line with... podcast, we discussed the critical role of drilling in the board manufacturing process. That is the subject of this article. Drilling can be one of the most complex and tricky steps in the manufacturing process. Designers need to be aware of how to craft their designs to avoid problems during drilling that can drive up costs and increase the risk of board performance issues.