Share on:

Share on LinkedIn Share on X Share on Facebook Share with email

Testimonial

"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "

Brent Fischthal - Koh Young

Suggested Items

U.S. Navy Doubles UAS Command Capacity with Second MD-5C

10/02/2026 | Lockheed Martin
The U.S. Navy has doubled its fleet capacity to operate the MQ-25A Stingray™ unmanned aircraft system (UAS) over a five-month period, standing up a second operational MD-5C Ground Control Station (GCS) powered by Lockheed Martin Skunk Works® MDCX™ autonomy platform.

October SMT007 Magazine Examines Automotive Soldering Reliability

10/01/2026 | I-Connect007 Editorial Team
The October 2026 issue of SMT007 Magazine is now available. As automakers add more electronics while maintaining high production volumes, the stakes for reliable electronics assembly continue to rise. Every added board, sensor, and control system must perform consistently under demanding conditions.

Northrop Grumman Deepens Defense Collaboration in Central and Eastern Europe

09/14/2026 | Northrop Grumman
Northrop Grumman is expanding its presence in Central and Eastern Europe with new memorandums of agreement (MOUs) designed to provide NATO allies with advanced, modernized defense capabilities.

Cadence PCIe 6.0 Subsystem Achieves First-Pass Compliance

09/02/2026 | Cadence Design Systems
Cadence announced that its PHY and controller IP for the PCI Express® (PCIe®) 6.0 specification, implemented in the TSMC N3 process, achieved first-pass success at the recent PCI-SIG® compliance workshop held in late July.

ITAR vs. EAR: When PCB Fabrication Can Move Outside the U.S.

08/31/2026 | Ryan O'Connor, SOMACIS
The difference between ITAR and EAR is often reduced to a simple rule of thumb: ITAR programs must stay in the U.S. (exceptions apply), while EAR programs can be built anywhere. In practice, that distinction is incomplete and often leads to sourcing decisions that introduce compliance risk rather than reducing it. Whether a PCB can be fabricated outside the United States depends not just on whether it is ITAR- or EAR-controlled, but on how the program is classified, what data is involved, who can access it, and how fabrication is executed across locations.
Copyright © I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in