-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueComing to Terms With AI
In this issue, we examine the profound effect artificial intelligence and machine learning are having on manufacturing and business processes. We follow technology, innovation, and money as automation becomes the new key indicator of growth in our industry.
Box Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Solder Paste Printing and Optimizations for Interconnecting Back Contact Cells
July 26, 2022 | Narahari S Pujari and Krithika PM, MacDermid Alpha Electronics SolutionsEstimated reading time: 2 minutes
Introduction
The interdigitated back contact (IBC) is one of the methods to achieve rear contact solar cell interconnection. The contact and interconnection via rear side theoretically achieve higher efficiency by moving all the front contact grids to the rear side of the device. This results in all interconnection structures being located behind the cells, which brings two main advantages. First, there is no frontside shading of the cell by the interconnection ribbons, thus eliminating the need for trading off series resistance, losses for shading losses when using larger interconnection ribbons. Second, a more homogeneous looking frontside of the solar module enhances the aesthetics. This combined increased power yield and improved aesthetics make back-contact modules particularly suited for special applications such as vehicle and building integration.
Out of many ways of interconnecting the IBC cells, busbar stringing, which is similar to conventional tabbing and stringing of two-side contacted cells, is the most common method2. In this technique, the metallization design of the cell contains multiple parallel-printed busbars distributed over the cell, allowing shorter finger length, and ribbon on busbar soldering. This reduces the resistance losses in the metallization compared to the edge stringing. With the advent in multibar bar (MBB) technology, the width of these busbars is also reducing and is down to around 300 to 500 microns. The interconnection can be carried out by either ECA (electrically conductive adhesives) or by using direct ribbon/wire. Both materials have created some challenges. The poor peel strength is often the major issue. The uniform IMC (intermetallic layer), which is characteristic of reliable bond strength, is absent with ECA. The metallization paste used in IBC is low-temperature-curing silver paste. The paste is fired at lower temperature around 500°C or less and deposited on silicon cell. In addition to that, the height of the paste is only about 8-12 micron. Because of this, silver leaching during interconnection is commonly observed. The metallization just comes off during interconnection at high temperature. If used, solder wire, cold solder joints, and solder diffusion through the cell are the major issues. Poor adhesion between cell and ECA, and interconnecting wire, high contact resistance are other common problems. Accordingly, when a circuit or conductive layer or interconnection is formed on a substrate using such conventional pastes, damage to the substrate or failure in reliability of the device may occur. Further, when ECA is used, silver in the ECA is expensive and appears on various restricted chemicals lists due its short supply.
To read this entire paper, which appeared in the July 2022 issue of SMT007 Magazine, click here.
Suggested Items
Indium Experts to Present on High-Temperature, Lead-Free Solder Paste and High Reliability Liquid Metal Alloys Poster at ECTC
05/16/2024 | Indium CorporationIndium Corporation Research Associate Kyle Aserian will deliver a presentation at the 74th Electronic Components and Technology Conference (ECTC) on May 31, in Denver, Colorado.
Indium Experts to Present at Electronics in Harsh Environments SMTA Conference
05/13/2024 | Indium Corporationndium Corporation Technical Manager for Europe, Africa, and the Middle East, Karthik Vijay, will deliver a technical presentation and Indium Corporation Senior Technologist, Dr. Ronald Lasky, will deliver both a workshop and technical presentation at the Electronics in Harsh Environments SMTA Conference on May 14-16 in Copenhagen, Denmark.
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.