Excerpt: 'The Printed Circuit Designer’s Guide to... Thermal Management with Insulated Metal Substrates, Vol. 2'
August 2, 2022 | Didier Mauve and Robert Art, VentecEstimated reading time: 1 minute
Introduction
The Printed Circuit Designer’s Guide to... Thermal Management with Insulated Metal Substrates, Volume 2, by Didier Mauve and Robert Art of Ventec International Group is the second in a two-part series. This book builds on the material presented in the first by describing up-to-the-minute products and design techniques for thermal management with IMS.
The first volume comprehensively covers principles of heat transfer and modeling of thermal systems to help engineers quantify the thermal-management challenges in the application at hand, the nature of IMS, typical material parameters, and the choices available for designers to reach the desired performance.
We recommend reading the first book in order to understand the issue from first principles, how to navigate the many material choices offered, and appreciate how adjusting the various combinations of material types and thicknesses can help you arrive at a solution that meets your requirements from all standpoints, particularly system reliability, size, cost, and manufacturability.
The Printed Circuit Designer’s Guide to... Thermal Management with Insulated Metal Substrates, Volume 2, covers additional use cases and materials, including those used for high-temperature applications as well as high-emissivity surface treatment that can significantly enhance thermal performance. A web-based thermal calculator is demonstrated, which helps arrive at the exact size of baseplate needed to achieve the desired thermal performance in the smallest possible volume—much smaller than would be possible using a suitably sized heatsink.
Volume 2 delves deeper into issues such as test methods and how these can affect assessments of IMS materials and analyzes the effects of tolerances in material properties and thickness on the overall thermal conductivity. Understanding this can critically influence measurement error, ultimately determining whether or not an accurate result for reliability can be calculated. The authors look at how problems such as solder cracks affect thermal performance, and share application examples showing design with multilayer IMS.
As application challenges have evolved, and new component types and thermal materials have entered the market, there is more to say about thermal management and the options available to designers striving for an effective, economical, and compact solution to meet system-reliability targets.
To continue reading this book from the I-007eBooks library, download it today!
Suggested Items
AIM Solder Appoints Mhanny Aguillo as Southeast Asia Technical Sales Manager
05/31/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials, is pleased to announce the appointment of Mhanny Aguillo as the Southeast Asia Technical Sales Manager.
Merlin Flex Invests in New Techwin Solder Mask Developer
05/31/2024 | Merlin Flex LtdMerlin Flex Continue their investment programme with the installation & commissioning of a new Techwin Solder Mask Developer. This new machine allows faster & more accurate developing in the solder mask process.
IPC Hand Soldering Competition Thailand 2024
05/29/2024 | IPCIPC’s hand soldering competitions around the world are highly popular events generating a lot of attention, participation and publicity. The competition attracts the enthusiastic participation of thousands of professionals specializing in high-reliability products within the electronics industry such as defense, aerospace/aviation, rail transportation, automotive electronics, consumer electronics, etc.
AIM Solder Joins International Electronics Manufacturing Initiative (iNEMI)
05/29/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials, is proud to announce its membership with the International Electronics Manufacturing Initiative (iNEMI).
Real Time with… IPC APEX EXPO 2024: Advanced Technologies with BlueRing Stencils
05/28/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and Greg Smith, manager of stencil technology with BlueRing Stencils, discuss the company's capabilities and services. They explore the use of nano coatings for thin stencils and determining the area ratio. Greg emphasizes the role of stencil artwork in controlling solder deposition and the need for collaboration between designers and stencil companies. They also focus on thinner stencils and step stenciling techniques for achieving proper solder deposition.