Marcy’s Musings: Operating Without a Rulebook
It’s Only Common Sense: Hire for Hunger, Train for Skill
Dan’s Biz Bookshelf: ‘The 'NVIDIA Way: Jensen Huang and the Making of a Tech Giant’
Cicor Group Achieved Record Sales and Operating Results From Organic Growth and Acquisitions
August 11, 2022 | CicorEstimated reading time: 3 minutes
Cicor Group increased its sales by 35.7% to CHF 157.7 million in the first half-year of 2022 (1st half-year 2021: CHF 116.7 million). In addition to the contribution from the newly acquired companies, organic growth of 15.4% was achieved. Operating earnings before interest, taxes, depreciation and amortization (EBITDA) increased significantly by 29.5 % in the first half of 2022, reaching CHF 15 million (1st half-year 2021: CHF 11.6 million). The best results in the company’s history were thus achieved both in terms of sales and EBITDA.
The economic environment in the reporting period remained challenging: high customer demand faced a lack of production capacity at many chip manufacturers, the impact of the COVID-19 pandemic, with lockdowns especially in China, economic fears due to the geopolitical situation and galloping inflation. Cicor was able to largely meet customers’ needs through joint efforts with suppliers and customers as well as flexible production, which contributed to the double-digit organic growth. Cicor booked new orders of CHF 181.8 million in the reporting period (1st half-year 2021: CHF 139.8 million), corresponding to a growth of 30%. The ratio of new orders to sales (book-to-bill rate) of 1.15 (1st half-year 2021: 1.20) reflects on the one hand the long-term ordering behavior of many customers and on the other hand Cicor’s success in the market.
The operating result at EBITDA level reached new record levels at CHF 15 million with a solid 9.5% EBITDA margin. While the EBITDA margin of the EMS Division improved to highly satisfactory 10.2% (1st half-year 2021: 8.9%), the AS Division suffered from cost increases that can only be passed on to the market with a time lag, which led to a decline in the EBITDA margin to 13.2% (1st half-year 2021: 18.4%).
Core EBIT1) increased disproportionately by 45.4% to CHF 9.7 million (1st half-year 2021: CHF 6.6 million), corresponding to a margin of 6.1% (1st half-year 2021: 5.7%). In addition to the acquisition effect of Axis Electronics, this positive development is also attributable to the increased production capacity utilization of the EMS Division.
Core net profit1) decreased slightly year-on-year to CHF 4.9 million (1st half-year 2021: CHF 5.2 million). This was mainly due to the strong appreciation of the Swiss franc against the Euro since the beginning of the year and increased financing costs.
Cicor has reorganized the divisional structure as of January 1, 2022. Since the thick-film substrates business at RHe Microsystems (Radeberg, Germany) now only plays a minor role and sales are largely driven by EMS services in the microelectronics sector, this reassignment is in line with the current business model. The EMS Division (Electronic Manufacturing Services) contributed 85.6% of Group sales in the reporting period, while the AS Division (Advanced Substrates, consisting of the development and production of printed circuit boards and thin-film substrates) delivered 14.4% of Group sales.
EMS division is growth driver
The acquisition of Axis Electronics (Bedford, UK, consolidated since December 2021) and SMT Elektronik (Dresden, Germany, consolidated since May 2022), together with significant organic growth, increased divisional sales by 42.2% to CHF 135.1 million (1st half-year 2021: CHF 95.0 million). The integration of the two companies is proceeding according to plan, and they contribute significant operating profits, resulting in a 63.9% increase in the operating result at EBITDA level to CHF 13.8 million (1st half-year 2021: CHF 8.4 million).
AS division with decline in earnings due to cost inflation
The AS Division achieved sales of CHF 23.3 million in the first half of 2022 (1st half-year 2021: CHF 22.1 million), a slight increase of 5.5%, driven in particular by a pleasing increase in demand for printed circuit boards for medical technology. The operating result EBITDA of CHF 3.1 million was 24.1% below the previous year’s result of CHF 4.1 million. Significant increases in material and energy costs, which can only be passed on to customers with a time lag, led to the lower AS results for the first half-year 2022.
Outlook for the second half and full year of 2022
The Cicor units report a normalization in order intake while the continuing shortage of certain electronic components hinders faster growth. The high order backlog and the bulging new project pipeline should however compensate for these negative effects during the remainder of 2022
Based on the current situation, Cicor expects to achieve sales of CHF 300–320 million in the full year 2022 with an EBITDA margin not significantly different from the first half of the year.
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
ESD Alliance Reports Electronic System Design Industry Posts $5.5 Billion in Revenue in Q4 2025
04/15/2026 | SEMIElectronic System Design (ESD) industry revenue increased 10.3% to $5,466.3 million in the fourth quarter of 2025 from the $4,955.2 million registered in the fourth quarter of 2024, the ESD Alliance, a SEMI Technology Community, announced today in its latest Electronic Design Market Data (EDMD) report.
Punching Out: How Many PCB Companies Are There in North America Now?
03/19/2026 | Tom Kastner -- Column: Punching Out!When I am asked how many PCB shops are still in the U.S., my answer is usually, “About 130. How many do you want to buy?” However, I do not really know the number. My job is either to sell PCB shops or help people buy them, not to count them. I probably should keep better track of them, but many are small (70% have revenue below $10 million), or they say they are making boards even if they rent out their facility as an auto repair shop.
EIPC Winter Conference 2026 Review: The Keynote Sessions
02/11/2026 | Pete Starkey, I-Connect007Aix-en-Provence (pronounced “ex-ahn-pro-vonse”), a historic city and commune in the south of France, about 20 miles north of Marseille, was the pleasant venue for EIPC’s Winter Conference in early February. Industry delegates from 11 European countries, as well as from the U.S. and China, gathered at the Renaissance Hotel for a two-day programme, “Driving the Future: Innovation, Energy, and Sustainability in PCB Technology.” An added attraction was a privileged visit to the ITER fusion power project at the Cadarache research and development centre.
SMTA Space Coast: What's Needed to Modernize Defense Solder Standards
12/23/2025 | Nolan Johnson, I-Connect007Long-time lead-free solder investigator, Denny Fritz, hit the SMTA Space Coast Expo in November to drum up support for an initiative to include lead-free solder in milaero-based printed circuit board assemblies. In this interview, Denny provides background on the genesis of the “consider all solders” project and why it matters to continue leading this effort.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
11/28/2025 | Nolan Johnson, I-Connect007Yesterday was the U.S. Thanksgiving holiday. The traditional meal is, of course, roast turkey with “all the trimmings.” Although not everyone observes that menu, most do, and it was reported that 42 million turkeys were consumed on that day. With an average weight of 16 pounds per turkey, we cooked up 672 million pounds! With approximately 342 million people in the U.S, that pencils out to just under two pounds of drumstick and white meat per person. That, my friends, is a whole lot of leftovers.