Exponential Growth in Production Demand Sees Cardea Eyeing the Millionth Biosensor in 2023
August 17, 2022 | PRNewswireEstimated reading time: 2 minutes

Since its founding in late 2013, Cardea's scientists have been pioneering the development of the world's first mass produced biocompatible semiconductor - the BPU (Biosignal Processing Unit) - also called a graphene Field Effect Transistor (gFET) or graphene biosensor.
Brett Goldsmith, PhD, Chief Technology Officer at Cardea, states, "20 years ago we started seeing signs that carbon-based electronics were going to succeed at integrating biology and electronics where existing semiconductors had failed. However, at that time, no one had the technical understanding or experience necessary to create a scalable system concept. This is what we've done at Cardea in creating our BPU platform of wetware, nanoware, hardware, and software modules. It's because of that scalability that I'm immensely proud to say that this year we reached over half a million sensors produced in total and we believe we have the capacity to reach more than one million in 2023."
While the use of graphene in electronics has been in the experimental phase for years, it's only recently that scalable production has been achieved. An industry deep-dive from McKinsey estimates that graphene will become a $70B market in semiconductors by 2030.
IEEE Medal of Honor recipient and founder of numerous MEMS (Micro-ElectroMechanical System) semiconductor companies, as well as member of Cardea's Innovation Council, Dr. Kurt Petersen, states, "Cardea's visionary team has successfully incorporated the many years of knowhow from silicon semiconductor processing and applied this knowledge to graphene-based semiconductors. That may sound trivial, but it's absolutely not. Not only did they have to overcome the challenges to incorporate new materials and production concepts but think of the very basic idea: They're measuring the electronic signals from biology in liquids and salts on top of a semiconductor, which would almost instantly render any silicon-based chip useless. Cardea is - both in terms of production capacity and quality, as well as IP - the world's leading company in graphene biosensors. They have a significant capacity to revolutionize medical diagnostics sooner than most people think."
Kelly Huang, PhD, Chief Operating Officer at Cardea, adds, "We've made significant improvements in our production processes over the past year. In 2020 and earlier, our average monthly production was around 1,000 chips, increasing to 5,000 in 2021. This year we've demonstrated capacity for 20,000 BPUs each month and have projected to significantly increase our production capacity, next year. Moreover, we are now above a 90% yield for transferring graphene on to printed wafers. Also, when we do finished product testing as a last step in our quality control process, 95% of the electrical properties we measure are within 20% of the mean. That signifies a solid quality in the final product, which means the scientists that are using our BPUs are experiencing great reproducibility and consistency in their day-to-day measurements."
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
NOVOSENSE, UAES and Innoscience Advance Power Electronics for New Energy Vehicles
10/17/2025 | PRNewswireThe partnership focuses on developing next-generation intelligent integrated Gallium Nitride (GaN) products. Leveraging their combined expertise, the new devices will deliver more reliable GaN driving and protection features, enabling higher power density and paving the way for wider adoption in automotive systems.
Jabil Announces Board Transitions
10/17/2025 | JabilJabil Inc. announced that Executive Chairman of the Board of Directors Mark T. Mondello and Directors Kathleen A. Walters and Jamie Siminoff will not seek re-election at Jabil’s Annual Meeting of Stockholders in January 2026.
StenTech Strengthens Precision Parts Platform with AME Acquisition
10/17/2025 | StenTechStenTech, North America’s leading provider of SMT printing solutions and precision manufacturing, has announced the acquisition of Advanced Metal Etching, Inc. (AME), a recognized specialist in chemically etched and laser cut precision parts.
MKS’ Atotech, ESI to Participate in TPCA Show & IMPACT Conference 2025
10/17/2025 | MKS’ AtotechMKS Inc., a global provider of enabling technologies that transform our world, announced that its strategic brands Atotech (process chemicals, equipment, software, and services) and ESI (laser systems) will showcase their latest range of leading manufacturing solutions for printed circuit board (PCB) and package substrate manufacturing at the upcoming 26th TPCA Show 2025 to be held at the Taipei Nangang Exhibition Center from 22-24 October 2025.
Rehm Wins Mexico Technology Award for CondensoXLine with Formic Acid
10/17/2025 | Rehm Thermal SystemsModern electronics manufacturing requires technologies with high reliability. By using formic acid in convection, condensation, and contact soldering, Rehm Thermal Systems’ equipment ensures reliable, void-free solder joints — even when using flux-free solder pastes.