-
-
News
News Highlights
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueSilicon to Systems: From Soup to Nuts
This month, we asked our expert contributors to weigh in on silicon to systems—what it means to PCB designers and design engineers, EDA companies, and the rest of the PCB supply chain... from soup to nuts.
Cost Drivers
In this month’s issue of Design007 Magazine, our expert contributors explain the impact of cost drivers on PCB designs and the need to consider a design budget. They discuss the myriad design cycle cost adders—hidden and not so hidden—and ways to add value.
Mechatronics
Our expert contributors discuss the advent of mechatronics in PCB design, the challenges and opportunities this creates for circuit board designers, and the benefits—to the employee and the company—of becoming a mechatronics engineer.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
DuPont Pyralux AP to Aid Reliable Performance of Semikron-Danfoss eMPack Modules Powering Next-Gen EV
September 22, 2022 | DuPontEstimated reading time: 1 minute
DuPont Interconnect Solutions, part of the Electronics & Industrial business, announced a multiyear contract with European power module manufacturer Semikron-Danfoss who will integrate DuPont™ Pyralux® AP all-polyimide double-sided copper clad laminate into its eMPack® power modules to further enhance the capabilities of next-gen electric vehicles.
Integrating Pyralux® AP copper clad laminate into eMPack® traction inverter designs will help EV automotive engineers address key requirements related to signal integrity and power transmission. The characteristics of Pyralux® AP benefiting this application from Semikron-Danfoss include:
- Robust thermal resistance for temperature stability
- All-polyimide dielectric layer
- Extreme durability
- Excellent bond strength for automotive-grade reliability
- Excellent low dissipation loss characteristics
- Superior electrical performance
- Consistent signal integrity
Further, Pyralux® AP’s dielectric thickness tolerance and low coefficient of thermal expansion make it ideal for rigid flex or multiple layer flex applications. The adhesive-less flexible circuit material has a flammability rating of UL 94-V0, a maximum operating temperature of 200°C, and is certified to IPC 4204A/11.
"Pyralux® AP emerged as our best-fit solution after extensive testing and because the product has demonstrated three decades of stable, reliable performance in a variety of industries where operating conditions, like ours, are severe,” said Karl-Heinz Gaubatz, CTO of Semikron. “eMPack® is a perfect fit to SiC MOSFET power modules. We look forward to working with DuPont and their Pyralux® technology to help eMPack® become a global leader in EV power modules.”
Earlier this year, Semikron-Danfoss, headquartered in Nuremburg, Germany, won a billion-Euro contract beginning in 2025 to furnish patented eMPack® power modules to a major German automotive manufacturer. Within silicon-carbide MOSFET or full silicon-carbide technology-based modules, traction inverters can be created which are extremely compact, scalable, and reliable because of a Semikron double side sintered assembly and connection technology called Direct Pressed Die (DPD).
“We are excited how this EV power module application of Pyralux® AP copper clad laminate supports a sustainable and electrified future to help preserve our planet for generations to come,” said Andy Kannurpatti, Global Business Director, Films & Laminates, DuPont Interconnect Solutions. “The eMPack® power module is expected to enable millions of next-gen electric vehicles by 2032. We look forward to contributing significantly to the much-anticipated success of eMPack® and appreciate the collaboration with Semikron-Danfoss.”
Suggested Items
Trouble in Your Tank: Things You Can Do for Better Wet Process Control
09/11/2024 | Michael Carano -- Column: Trouble in Your TankFor 40 years, I have been involved in the printed circuit board, circuit board assembly, and semiconductor technology segments, preaching about minimizing defects and improving yields. This is especially true as technology becomes increasingly complex, and additional focus must be placed on yield improvements. Process management and wet process control must be front and center, so it’s quite interesting and timely to talk about wet process control and management for this month’s issue. This theme fits quite well with today's global events. For this industry, the technical curve has steepened dramatically in the past few years.
Atotech to Participate at KPCA Show 2024
09/03/2024 | AtotechMKS’ Atotech will participate in this year’s KPCA Show 2024 in Incheon, held at Songdo Convensia from September 4-6, 2024.
Victory Announces Breakthrough in PCB Technology with New Product Launch
08/29/2024 | openPRShenzhen Victory Electronics Technology Co., Ltd., a leader in the printed circuit board (PCB) manufacturing industry, is proud to announce the successful development of a groundbreaking new product.
Connect the Dots: Designing for Reality—Electroless Copper
08/28/2024 | Matt Stevenson -- Column: Connect the DotsRoll up your sleeves because it's time to get messy. In a recent episode of I-Connect007’s On the Line with… podcast, we discussed electroless copper deposition. This process deposits a copper layer into the through-holes and vias of what will eventually be a PCB. Electroless copper deposition feels like a black box to many people. It sort of looks like a black box, too. The boards go in one side, come out the other, and emerge differently. So, let's crack open that black box and look inside.
Maximizing ROI Through Better Wet Process Control
08/20/2024 | I-Connect007 Editorial Team“When things get out of control, the variation in your wet process begins,” says Mike Carano,. “Just because they look like good boards and may even pass electrical test, it does not necessarily mean you have good boards. Once the chemistry is headed toward the right or left side of the process control parameter cliff, the plating is compromised. If the copper is thinner than it should be, when the customer puts it into service, the board may fail after 500 cycles vs. the requisite 1,000 or 2,000 cycles. The root cause issue is that you plated 7/10ths of a mil of copper instead of one-mil of copper because you were not controlling your process. The fact that you passed your own electric test becomes inconsequential.”