-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
Article Highlights
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
HDI, A-SAP and mSAP: A Designer’s Point of View
October 26, 2022 | Cherie Litson, CID+, Litson1 ConsultingEstimated reading time: 1 minute
HDI—high-density interconnect—designs require some different thinking on the part of the designer. One of the first things to consider is whether you need HDI, and if so, how much. The HDI option comes into play as soon as you purchase any components with 0.5 mm pin pitch.
The number of these components and other specifications of your design will determine the amount of HDI you will need. Each option brings choices that will affect fabrication and assembly, so a little research is needed before making these choices. Here’s a quick list of HDI options:
- Smaller vias
- Smaller traces
- Thinner dielectrics
- Tighter solder mask clearances
- Controlled paste mask construction
I’m only going to explore the first two, as these often determine which fabrication process you want to use.
Smaller Vias
A variety of options are available here:
Blind vias with through vias
This is the optimal choice. It adds a little expense while giving you the ability to place components on both sides of the board without having to be confined by opposing pad with different nets.
Blind and buried vias with through vias
This option gives you the most routing control; however, it also adds the most cost.
Through vias only
While this can cut fabrication costs, it limits breakout, routing, via size, and component placement. Smaller vias are dependent upon the aspect ratio of the board. Keep the board thin and most fabricators can produce smaller vias, down to 6 mils (1.5 mm) if your board measures 50 mils of thickness or less, without additional costs.
Both the A-SAP and mSAP processes can be used to plate holes. Again, the aspect ratio will make a difference. Also, how much plating do you need? Are you plugging the vias with conductive or non-conductive material?
Smaller Traces
How small you will go depends on the fabrication process you select and how small the component pin pitch is.
It’s important to understand the differences between A-SAP and mSAP before you commit to a process. Standard subtractive etch processes start with very thin copper foils, etch a pattern, and then add copper for the finished traces and copper features.
To read this entire article, which appeared in the October 2022 issue of Design007 Magazine, click here.
Suggested Items
Indium Experts to Present on High-Temperature, Lead-Free Solder Paste and High Reliability Liquid Metal Alloys Poster at ECTC
05/16/2024 | Indium CorporationIndium Corporation Research Associate Kyle Aserian will deliver a presentation at the 74th Electronic Components and Technology Conference (ECTC) on May 31, in Denver, Colorado.
Indium Experts to Present at Electronics in Harsh Environments SMTA Conference
05/13/2024 | Indium Corporationndium Corporation Technical Manager for Europe, Africa, and the Middle East, Karthik Vijay, will deliver a technical presentation and Indium Corporation Senior Technologist, Dr. Ronald Lasky, will deliver both a workshop and technical presentation at the Electronics in Harsh Environments SMTA Conference on May 14-16 in Copenhagen, Denmark.
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.