Driving Innovation: Direct Imaging vs. Conventional Exposure
It’s Only Common Sense: Selling to Today's Generation of Buyers
Dan’s Biz Bookshelf: ‘Believe in Better'
Five Priorities for Implementing Direct Imaging Technologies
November 8, 2022 | Brendan Hogan, MivaTekEstimated reading time: 2 minutes
The circuit fabrication industry has always been the unsung hero of the electronics era. SPC, TQM, ISO, and 50 other acronyms have ruled the day to govern quality and process approaches. I’ve been in the industry for 39 years and I feel more like a craftsman than ever before—trying to figure out how to produce the impossible and maintain a profit.
With smaller features, exotic materials, endless plating, and press cycles, the industry feels like it is in transition. Soon enough the lines between microelectronics and PCB will be forever blurred. The result is that digital direct imaging has become an instrumental tool in the circuit craftsman’s toolbox, but the selection process is just the first key step in tapping this valuable and expensive technology. Here are five priorities for you own “toolbox.”
1. Selection process.
A thorough examination of what a direct imager can do is vital. Often the PCB shop is looking at its most current difficult problem to solve and it prepares a sample that confirms DI can do today’s tough applications. The selection process must give a high score to a tool (and a supplier) that is adaptable and a true problem solver, because by next month, year, or decade the direct imaging system will need to do things that haven’t been thought of yet. Direct imaging is a major capital purchase; extending the investment time horizon by acquiring a tool that has many uses must be a factor in the ROI.
2. Supplier as a partner.
Direct imaging is a tool that relies on and influences many different processes. It’s important to look at the role the supplier has within the industry and their approach or “passion level” for solving problems with rational cost and agility. Direct imaging combines so many disciplines; it is much more than selecting a machine. Imaging suppliers must be experts with imaging, of course, but should also contribute to the processes that DI impacts. If you make the right choice the supplier will become your partner and you will become theirs.
3. Team approach.
The selection process usually includes a core group of two to four people at the PCB facility. However, a successful implementation should involve many more people. Our experience is that the most successful deployments of direct imaging are those that initiate communication and training immediately after the purchase agreement. Initiating a successful implementation before the machine even arrives accelerates the timing of all savings and traps issues not considered during the selection process. The supplier is your partner; he wants a successful implementation and should be happy to participate.
To read this entire article, which appeared in the October 2022 issue of PCB007 Magazine, click here.
Share on:
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/27/2025 | Nolan Johnson, I-Connect007While news outside our industry keeps our attention occupied, the big news inside the industry is the rechristening of IPC as the Global Electronics Association. My must-reads begins with Marcy LaRont’s exclusive and informative interview with Dr. John Mitchell, president and CEO of the Global Electronics Association. For designers, have we finally reached the point in time where autorouters will fulfill their potential?
Reflections and Priorities: An Update to I-Connect007 Readers
06/24/2025 | Marcy LaRont, I-Connect007The electronics and manufacturing industry is evolving rapidly—with new technologies, deeper global connections, and a growing drive toward sustainability. To reflect these changes and our place in this dynamic space, we’re refreshing our brand.
The Knowledge Base: Building the Workforce of Tomorrow With EMAC
06/24/2025 | Mike Konrad -- Column: The Knowledge BaseAs the electronics manufacturing industry races to meet rising global demand and technological complexity, the need for a highly skilled, future-ready workforce has never been greater. At the forefront of addressing this challenge is The Electronics Manufacturing & Assembly Collaborative (EMAC)—a national initiative dedicated to strengthening the talent pipeline through strategic collaboration with SMTA, education, and government stakeholders.
IPC Rebrands as Global Electronics Association: Interview With Dr. John W. Mitchell
06/22/2025 | Marcy LaRont, I-Connect007Today, following a major announcement, IPC is embracing the rapid advancement of technology with a bold decision to change its name to the Global Electronics Association. This name more accurately reflects the full breadth of its work and the modern realities of electronics manufacturing. In this exclusive interview, Global Electronics Association President and CEO Dr. John W. Mitchell shares the story behind the rebrand: Why now, what it means for the industry, and how it aligns with the organization’s mission.
Global Electronics Association Debuts; New Name Elevates IPC’s 70-Year Legacy as Voice of $6 Trillion Electronics Industry
06/25/2025 | Global Electronics AssociationToday begins a new chapter for IPC as it officially becomes the Global Electronics Association, reflecting its role as the voice of the electronics industry. Guided by the vision of “Better electronics for a better world,” the Global Electronics Association (electronics.org) is dedicated to enhancing supply chain resilience and promoting accelerated growth through engagement with more than 3,000 member companies, thousands of partners, and dozens of governments across the globe.