The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
Indium Corporation Announces New Jetting Solder Paste
November 10, 2022 | Indium CorporationEstimated reading time: 1 minute
Indium Corporation has announced a new jetting solder paste in its line of PicoShot products. PicoShot WS-5M is designed for customers needing an SnPb solder paste for their Mycronic MY-series jet printers.
PicoShot WS-5M is a water-soluble, halogen-free paste developed as a result of a close, collaborative relationship with Mycronic for their MY 600/700 jetting systems. This product has been beta-tested at customer sites, showing proven performance on customer lines.
PicoShot WS-5M has been extensively tested to provide exceptional jetting performance. It delivers:
- Smallest dot volume among pastes in its class: 6.5nl/dot, 350µm diameter
- Precision deposit (x,y targeting)
- Long usage (syringe life) >8 hours
- Minimal statellites
PicoShot WS-5M is a water-soluble, halogen-free solder paste approved after joint Indium/Mycronic technical development with Mycronic’s MY 600/700 jetting systems. PicoShot can be used in applications, such as jetting into cavities and uneven/warped substrates, high-mix/low-volume stencil replacement, CSP/microBGA solder attach, military and aerospace jetting applications, system-in-package (SiP), camera module assembly where an overmolding step is required, and shield-attach and secondary processing.
Utilizing a Type 5 solder powder and an SnPb alloy, this material is inherently chemically compatible with Indium Corporation’s Indium6.6HF-HD Solder Paste. PicoShot® WS-5M’s unique oxidation barrier promotes complete powder coalescence during reflow to eliminate graping and similar reflow issues.
PicoShot WS-5M jetting solder paste is the second material to come out of Indium Corporation’s new partnership with Mycronic, a global leader in dispensing and jet printing equipment.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.