I-Connect007 Editor’s Choice: Five Must-Reads for the Week
December 2, 2022 | Nolan Johnson, I-Connect007Estimated reading time: 2 minutes
Normally, the holiday season is a slow(ish) news time, but this year just feels different. My opinion is that the technology industry banked up a whole bunch of innovations and new products during the pandemic disruptions, which are coming to market as quickly as possible. The November/December news is full of technology discussion, as my selections this week clearly demonstrate.
We have a discussion on additively manufactured electronics, as well as a high-level look at fabrication for the UHDI market—both emerging markets. I also noticed that our readers were quite interested in industry reports on U.S. semiconductor industry challenges, and a forward look at the drivers in the flexible PCB fabrication market, so I was sure to include the links again. Finally, I thought I’d share the news item about a new missile guidance system prototype test that caught reader attention and which has garnered quite a bit of attention.
3D Electronic Devices With Additive Manufacturing
Published November 29
In the news on Dec. 1, Nano Dimension issued a press release announcing Q3 2022 results where the company shares that it is on track to increase revenue by 10X over 2020’s results. That news shines a spotlight on this article from Shavi Spinzi discussing the possibilities of additively manufactured electronics.
Global Flexible PCB Market Report 2022: Rising Use in the Aerospace and Aviation Sector Boosts Growth
Published November 25
My recent conversations with flex manufacturers all have a familiar tone: “We’re really busy, capacity is maxed out.” Well, this quote from the Flexible PCB Marketplace Report news release corroborates what I’m hearing: “The [flex] market is expected to surge in the coming years due to the rising use of flexible printed circuit boards in consumer electronics, especially smartphones, laptops, displays, and other electronic devices. According to official industrial sources, around 1.5 billion smartphones were sold in the year 2019.” The article discusses automotive, aviation and aerospace.
Understanding the UHDI Market
Published November 28
This interview with Meredith LaBeau and Todd Brassard from Calumet Electronics included this in the setup to the conversation, “The more we investigate UHDI in the current market, the more advanced packaging becomes a part of the conversation. The two emerging technologies lean on each other for their overall success. UHDI is the method by which state-of-the-art advanced packaging will be fabricated; substrates are creating a market for UHDI capabilities.” In many ways, Calumet is blazing the trail for nimble PCB fabricators to move forward into capabilities that support advanced packaging. Clearly, readers were interested this week in what LaBeau and Brassard had to say.
New Report Identifies Challenges to Continued U.S. Leadership in Semiconductor Design, Innovation
Published November 30
This report from the Semiconductor Industry Association (with Boston Consulting Group) identifies three key areas the U.S. must address in the administration of the CHIPS Act in order to maintain a leadership position: Design and R&D investment needs are on the rise, there is a shortage of domestic design talent, and open access to global markets is under pressure. Take a read and see if you agree.
PAC-3 Intercepts Target In Successful Test of Lockheed Martin Remote Interceptor Guidance
Published November 25
Lockheed Martin announced that their new missile communication device connected with a U.S. Army PAC-3 missile in flight. This prototype system is seen as a step forward in missile guidance systems.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Magnalytix's Services and Trends in the Electronics Industry
05/10/2024 | Real Time with...IPC APEX EXPOMike Bixenman, president of Magnalytix, explains Magnalytix's services, including third-party validation, test boards, electrical testing, and comprehensive reports. He also discusses emerging trends such as power electronics and reliability. Standards and design improvements also form part of this conversation.
Podcast Review: On the Line with… Designing for Reality
05/09/2024 | Duane Benson, Positive Edge LLCAs a technologist, if I were forced to come up with just one recurring theme that I might call a professional “nemesis,” it would be the difference between theory and reality. A lot of technology we have at our disposal works well in theory but falls short when reality hits. That’s not the only reason I chose to listen to and review On the Line with… Designing for Reality, featuring a series of conversations with ASC Sunstone’s Matt Stevenson, but it certainly helped that the title caught my eye.
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.
KYZEN’s Adam Klett to Keynote at SMTA Electronics in Harsh Environments Conference
05/07/2024 | KYZEN'KYZEN, the global leader in innovative environmentally friendly cleaning chemistries, announced today that KYZEN’s Director of Science, Adam Klett, PhD will present as a keynote speaker at the SMTA Electronics in Harsh Environments Conference. The event is scheduled to take place May 14-16, 2024 at the Technical University of Denmark in Copenhagen, Denmark.
Altus Equips SSTL with Advanced Cleaning Technology for Electronics
05/07/2024 | Altus GroupAltus Group, a leading supplier of capital equipment for the electronics manufacturing industry, has announced the successful installation of an advanced PCBA cleaning system at Surrey Satellite Technology Limited (SSTL).