-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueInner Layer Precision & Yields
In this issue, we examine the critical nature of building precisions into your inner layers and assessing their pass/fail status as early as possible. Whether it’s using automation to cut down on handling issues, identifying defects earlier, or replacing an old line...
Engineering Economics
The real cost to manufacture a PCB encompasses everything that goes into making the product: the materials and other value-added supplies, machine and personnel costs, and most importantly, your quality. A hard look at real costs seems wholly appropriate.
Alternate Metallization Processes
Traditional electroless copper and electroless copper immersion gold have been primary PCB plating methods for decades. But alternative plating metals and processes have been introduced over the past few years as miniaturization and advanced packaging continue to develop.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
NASA Space Missions Pinpoint Sources of CO2 Emissions on Earth
January 10, 2023 | NASA JPLEstimated reading time: 3 minutes
A case study involving Europe’s largest coal-fired power plant shows space-based observations can be used to track carbon dioxide emissions – and reductions – at the source.
A duo of Earth-observing missions has enabled researchers to detect and track carbon dioxide (CO2) emission changes from a single facility, using the world’s fifth-largest coal-fired power plant as a test case.
In the recent study, researchers used space-based measurements from NASA’s Orbiting Carbon Observatory (OCO) 2 and 3 missions to quantify the carbon dioxide discharged hundreds of miles below at Be?chatów Power Station in Poland, the largest single emitter in Europe. Analyzing the plant’s emission plumes from several satellite overpasses between 2017 and 2022, they detected changes in carbon dioxide levels that were consistent with hourly fluctuations in electricity generation. Temporary and permanent unit shutdowns (for maintenance or decommissioning) reduced the plant’s overall emissions, which the team was able to detect as well.
Launched in 2014, NASA’s OCO-2 satellite maps natural and human-made (anthropogenic) carbon dioxide emissions on scales ranging from regions to continents. The instrument samples the gas indirectly by measuring the intensity of sunlight reflected off Earth’s surface and absorbed by carbon dioxide in the column of air from the ground to the satellite. OCO-2’s spectrometers are tuned to detect the specific signature of CO2 gas.
Spare components from that mission were used to create OCO-3, an instrument that has flown on the International Space Station since 2019. OCO-3 was designed with a mapping mode that can make multiple sweeping observations as the space station passes over an area, allowing researchers to create detailed mini-maps from a city-scale area of interest.
Neither OCO instrument was originally designed specifically to detect emissions from individual facilities such as Be?chatów, so the new findings are a “pleasant surprise,” said Abhishek Chatterjee, project scientist for the OCO-3 mission at NASA’s Jet Propulsion Laboratory in Southern California. “As a community we are refining the tools and techniques to be able to extract more information from the data than what we had originally planned,” he added. “We are learning that we can actually understand a lot more about anthropogenic emissions than what we had previously expected.”
Tracking Carbon Into the Future
Emissions from large facilities such as power plants and refineries account for about half of global carbon dioxide emissions from fossil fuels. Be?chatów Power Station, in operation since 1988, is the largest lignite-fired power plant in the world, with a reported capacity of 5,102 megawatts. Lignite (brown coal) typically leads to higher emissions per megawatt generated than anthracite (hard coal). The Polish government has drafted plans to close the plant by the end of 2036.
Ray Nassar, a senior researcher at Environment and Climate Change Canada and the study’s lead author, noted that most carbon dioxide emissions reports are created from estimates or data collected at the land surface. Researchers account for the mass of fossil fuels purchased and used, then calculate the expected emissions; they generally do not make actual atmospheric carbon dioxide measurements.
“The finer details about exactly when and where emissions occur are often not available,” Nassar said. “Providing a more detailed picture of carbon dioxide emissions could help to track the effectiveness of policies to reduce emissions. Our approach with OCO-2 and OCO-3 can be applied to more power plants or modified for carbon dioxide emissions from cities or countries.”
Because of the mapping mode observations of OCO-3, NASA data could be used more extensively in quantifying CO2 point-source emissions in the future. NASA recently announced that mission operations will be extended for several more years aboard the space station, and the instrument will operate alongside another greenhouse gas observer aboard the space station, the Earth Surface Mineral Dust Source Investigation (EMIT).
“It is really exciting to think that we will get another five to six years of operations with OCO-3,” Chatterjee said. “We are seeing that making measurements at the right time and at the right scale is critical.”
He added that OCO-3 can serve as a “pathfinder” for next-generation satellite missions. The OCO-2 and OCO-3 projects are managed by JPL. Caltech manages JPL for NASA.
Suggested Items
Intervala Hosts Employee Car and Motorcycle Show, Benefit Nonprofits
08/27/2024 | IntervalaIntervala hosted an employee car and motorcycle show, aptly named the Vala-Cruise and it was a roaring success! Employees had the chance to show off their prized wheels, and it was incredible to see the variety and passion on display.
KIC Honored with IPC Recognition for 25 Years of Membership and Contributions to Electronics Manufacturing Industry
06/24/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, is proud to announce that it has been recognized by IPC for 25 years of membership and significant contributions to electronics manufacturing.
Boeing Starliner Spacecraft Completes Successful Crewed Docking with International Space Station
06/07/2024 | BoeingNASA astronauts Barry "Butch" Wilmore and Sunita "Suni" Williams successfully docked Boeing's Starliner spacecraft to the International Space Station (ISS), about 26 hours after launching from Cape Canaveral Space Force Station.
KIC’s Miles Moreau to Present Profiling Basics and Best Practices at SMTA Wisconsin Chapter PCBA Profile Workshop
01/25/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, announces that Miles Moreau, General Manager, will be a featured speaker at the SMTA Wisconsin Chapter In-Person PCBA Profile Workshop.
The Drive Toward UHDI and Substrates
09/20/2023 | I-Connect007 Editorial TeamPanasonic’s Darren Hitchcock spoke with the I-Connect007 Editorial Team on the complexities of moving toward ultra HDI manufacturing. As we learn in this conversation, the number of shifting constraints relative to traditional PCB fabrication is quite large and can sometimes conflict with each other.