-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueSales: From Pitch to PO
From the first cold call to finally receiving that first purchase order, the July PCB007 Magazine breaks down some critical parts of the sales stack. To up your sales game, read on!
The Hole Truth: Via Integrity in an HDI World
From the drilled hole to registration across multiple sequential lamination cycles, to the quality of your copper plating, via reliability in an HDI world is becoming an ever-greater challenge. This month we look at “The Hole Truth,” from creating the “perfect” via to how you can assure via quality and reliability, the first time, every time.
In Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
- Articles
- Columns
- Links
- Media kit
||| MENU - pcb007 Magazine
IPC APEX EXPO Wrap-up
January 30, 2023 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes

IPC APEX EXPO 2023 is over, and I think it was a successful show no matter how you slice it.
There was barely a break in traffic on the show floor on Tuesday and Wednesday, and even on Thursday I saw people sprinting to close one more deal. Some committee meetings had nearly 200 participants; the meetings I sat in on were anything but boring. These people are passionate about their work, and they voted for changes in standards by waving green cards, like a crazy auction.
Almost everyone I spoke with was upbeat; the tech layoffs and inflation were barely mentioned during the show. Many companies are having a fantastic year. And we all enjoyed being able to talk face-to-face without N95 masks this year.
The Professional Development and Technical Conference classes were well attended. I spoke with a few dozen class attendees, and I was surprised at how much of the fabrication and assembly content focused partially on the PCB designer’s needs. Process engineers were there to learn how they could better help designers, who would in turn make their lives easier. Gone are the days when you could focus mainly on what happens downstream from you.
If I went to trade shows every week, I’d probably have strong leg muscles but still be overweight. During the show, I averaged 16,000 steps each day, but I also tore through a lot of fat and carbs, along with a generous portion of caffeine, hops and barley. I couldn’t find the gym in my hotel, but I didn’t look very hard either.
One of my favorite parts of the show was getting to play guitar almost every day with my cohorts Managing Editor Nolan Johnson, Technical Editor Dan Feinberg, and columnist Kelly Dack. We only play together once a year, but we’ve found about 10 songs, AKA “The Hits,” that work well for us. You can’t go wrong with singalong tunes like “Mustang Sally,” “Can’t You See” and “Mary Jane’s Last Dance.”
It’s always nice to see old friends at trade shows, especially now that so many of us work remotely. I only see my co-workers in person once or twice a year now, so we try to make the most our time together. The Irish pub The Fields was full of APEX attendees every night; it’s become the industry hangout in San Diego.
Next year, the show rolls up to the Anaheim Convention Center the week of April 9-11, 2024. Now, back to work!
Suggested Items
TRI to Exhibit at SMTA Queretaro Expo 2025
07/16/2025 | TRITest Research, Inc. (TRI), the leading provider of test and inspection systems for the electronics manufacturing industry, is pleased to announce plans to exhibit at the SMTA Querétaro Expo 2025, scheduled to take place on July 24, 2025, at the Querétaro Centro de Congresos y Teatro Metropolitano.
Global PCB Connections: Let the Spec Fit the Board, Not Just the Brand
07/17/2025 | Jerome Larez -- Column: Global PCB ConnectionsIf you’ve ever seen an excellent PCB quote delayed, or worse, go cold because of a single line on the fab print, you’re not alone. Often, that line reads something like, “Use 370HR only,” or “IT-180A required.” These and other brand-name materials are proven performers, but unless your design needs that specific resin system (say, for RF performance, thermal reliability, or stringent CAF resistance), you may inadvertently be holding your job hostage.
IPC Hall of Fame Spotlight Series: Highlighting Lionel Fullwood
07/15/2025 | Dan Feinberg, I-Connect007Many IPC members who have contributed significantly to IPC and our industry have been awarded the IPC Raymond E. Pritchard Hall of Fame (HOF) Award. Though many early HOF members have passed away and are unknown to today’s IPC membership, their contributions still resonate. This special series on IPC Hall of Fame members provides a reminder of who was honored and why. As a bonus, for those who are still around, we get to find out what these talented individuals are up to today.
TRI Unveils New Platform for Diverse Board Sizes
07/14/2025 | TRITest Research, Inc. (TRI), the leading test and inspection systems provider for the electronics manufacturing industry, proudly introduces a new size configuration for SPI and AOI Models.
Seeing a Future in Mexico
07/09/2025 | Michelle Te, I-Connect007The Global Electronics Association (formerly known as IPC) has been instrumental in fostering a partnership with Guanajuato, a state north of Mexico City with 12 industrial clusters and close to 150 companies involved in electronics. This past spring, Alejandro Hernández, the undersecretary for investment promotion in Guanajuato, attended IPC APEX EXPO 2025 at the invitation of IPC Mexico Director Lorena Villanueva, where he met with several companies to discuss the opportunities available in Mexico. He is inviting electronics-related companies seeking long-term investment in a centrally located area with access to highways, railways, and ports.