Dan's Biz Bookshelf: 'Revenge of the Tipping Point'
Marcy's Musings: Engineering Economics
Punching Out: Should You Sell Your Company to a Private Equity Firm?
Small, Efficient 5G Multisector Antenna Indoor Base Station Achieves World's First Demonstration using 28GHz
January 31, 2023 | ACN NewswireEstimated reading time: 2 minutes
Yokohama National University, NTT DOCOMO, INC., NIHON DENGYO KOSAKU Co., Ltd. and Fujitsu Ltd. announced today that they successfully demonstrated a 5G indoor base station incorporating a multisector antenna using the 28GHz band on January 27. The device, which incorporates circuitry just 1/10th the size of a conventional indoor base station, is extra small for easy installation, minimizes energy consumption and achieves highly efficient signal propagation, all of which will contribute to the realization of high-quality connectivity indoors.
The demonstration, in which a conventional 5G base station control unit communicated with the new device via a 28GHz signal, confirmed that a single multisector antenna can receive radio waves in all directions using radio beam control. DOCOMO previously measured the directivity of a single element in a multisector antenna in 2022, but the DOCOMO believes that this was the world's first demonstration to use a multisector antenna in a 5G base station equipped for radio beam control.
A multisector antenna divides its surrounding 360-degree space into multiple areas (sectors) for transmitting and receiving radio waves simultaneously and independently in each sector. The antenna used in the demonstration contained 12 directional elements arranged in a radial pattern, each of which effectively transmitted and received radio waves in a specific direction. A Yagi-Uda antenna developed originally for television broadcasting was deployed for the high-frequency band. Conventionally, multiple multielement planar-array antennas are required to propagate high-frequency radio waves to all areas of an indoor environment, requiring large circuitry that consumes significant amounts of energy and demands ample space for installation.
By using 5G-standardized beam-switching technology, however, the newly demonstrated multisector antenna incorporated in a small base station managed to achieve high gain in all directions with minimized energy consumption. Installing the envisioned device on ceilings will help to deliver high-frequency radio waves effectively throughout each room, thus reducing the number of base stations needed to construct high-quality indoor communication environments.
High-frequency radio waves have strong linearity and their strength tends to diminish easily, making it difficult to deliver such waves over wide areas. Conventionally, four or more base station antennas are required to transmit radio waves in all directions in a room, but the recent demonstration has now shown that just one multisector antenna can handle the task.
Going forward, DOCOMO plans to conduct verification tests using the new base station in various indoor environments, based on which it intends to finalize the antenna circuitry and incorproate it in commercial base stations for the establishment of high-quality indoor communication environments at a reduced cost. In addition, the Yokohama National University, DOCOMO, NIHON DENGYO KOSAKU and Fujitsu will work towards 5G Evolution & 6G in order to achieve compatibility with future mobile networks' high-frequency millimeter and terahertz waves for the further enhancement of indoor connectivity
Share on:
Suggested Items
Keysight Enabling University of Stuttgart to Advance 6G Integrated Circuits Research
08/10/2023 | Keysight Technologies, Inc.Keysight Technologies, Inc. is enabling the University of Stuttgart to conduct foundational research essential to development of new integrated circuits (IC) for 6G technology with the new Keysight 6G Vector Component Analysis (VCA) solution.
KSG Group Puts Horizontal OSP Line for Organic Surfaces into Operation
07/31/2023 | KSG GroupThe KSG Group has expanded its capacities in the field of organic surface coating by bringing a new wet-chemical horizontal system online.
Mil/Aero Design: Not Just Another High-Rel Board
07/25/2023 | Andy Shaughnessy, Design007 MagazineMeijing Liu, CID+, is a senior PCB designer for Microart Services, an EMS company in Markham, Ontario, Canada. She recently took a six-week military/aerospace PCB design class from IPC’s Kris Moyer, and she was surprised at how much content she was able to absorb in such a short time. I spoke with Meijing and we discussed some of her takeaways from the class, and how it has inspired her to pursue more design education in the future.
MACOM Awarded U.S. Air Force Contract for Advanced Semiconductor Development
07/20/2023 | Business WireMACOM Technology Solutions Inc., a leading supplier of semiconductor products, announced that it has been awarded a contract from the United States Air Force Research Laboratory (“AFRL”) to develop advanced semiconductor process technology related to Gallium Nitride-on-Silicon Carbide (“GaN-on-SiC”).
Standard of Excellence: Today’s Hottest Technology Trends
07/21/2023 | Anaya Vardya -- Column: Standard of ExcellenceNo matter what anyone says, printed circuit boards are the backbone of modern electronics. Without the PCB, what will the components attach to? Without advancements in printed circuit board technology, products of the future would be impossible. It is our responsibility to be there when our customers need us—today and in the future. That means recognizing the latest trends and making the most of them. Here's what I see is trending in microelectronics.