-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueIn Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
The Essential Guide to Surface Finishes
We go back to basics this month with a recount of a little history, and look forward to addressing the many challenges that high density, high frequency, adhesion, SI, and corrosion concerns for harsh environments bring to the fore. We compare and contrast surface finishes by type and application, take a hard look at the many iterations of gold plating, and address palladium as a surface finish.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
IPC Issues February Economic Outlook Report: Economic Data Provides a Mixed View of the Economy
March 2, 2023 | IPCEstimated reading time: 1 minute

Economic data over the last month is providing a mixed view of the economy per IPC’s February Economic Outlook report.
“On one hand, economic fundamentals continue to slow,” said Shawn DuBravac, IPC chief economist. “However, despite aggregate softness, certain segments continue to do well. For example, the defense and space equipment sector hit another new high in January, aerospace is up significantly from pre-pandemic levels and other sectors key to the electronics industry are holding up well.”
The report also shows that manufacturing sectors in Europe, the U.S., and China are all signaling contraction according to their respective PMI indexes, but in China and Europe at least, things are looking less bad this month. Despite signs of slowing demand, manufacturers continue to hire. “The broader economy added more than 500,000 new jobs, a shocking number in the midst of what many believe is the start of a recession,” added DuBravac.
Additional data in report show:
- U.S. manufacturing sentiment contracted for a third consecutive month, falling from 48.4 to 47.4 in January.
- U.S. industrial production was unchanged in January, but was noticeably weaker than the expected 0.5 percent increase. The manufacturing sector improved 1 percent in January, but prior months were revised downward leaving the headline index lower than previously believed. Industrial production has likely peaked, despite January’s rise.
- The S&P Global Eurozone Manufacturing PMI moved higher in January, rising from 47.8 to 48.8. The index hit a five month high, but remains in contractionary territory.
- EU electronics manufacturing output fell in December after a one month increase in November. Output declined 1.4 percent (month-on-month) and is down 0.9 percent over the last year.
- Despite indications that the global economy continues to slow, economists have marginally raised forecasts for economic growth in the U.S., Europe, and China for 2023.
View full report. For more information on IPC’s industry intelligence program including new reports, visit: www.ipc.org/advocacy/industry-intelligence.
Suggested Items
Microsembly Furthers RF Hybrid Manufacturing Services with New Automated Wire Bonding and Die Attach Equipment
05/30/2025 | MicrosemblyMicrosembly, a US-based provider of high-frequency contract manufacturing services, has announced the addition of new state-of-the-art automated and manual wire and ribbon bonders to its advanced RF and microwave assembly, manufacturing, and testing facility.
Kimball Electronics to Open New Medical Manufacturing Facility
05/30/2025 | Kimball ElectronicsKimball Electronics has announced the addition of a 300,000 sq ft manufacturing facility in Indianapolis centered on the medical industry.
GTSMT SMT Production Lines are Transforming Modern Electronics Manufacturing
05/29/2025 | EINPresswire.comGTSMT, a prominent leader in the Surface-Mount Technology (SMT) sector, announced the introduction of cutting-edge innovations designed to tackle the evolving challenges facing the global electronics manufacturing industry.
The French Oil Mill Machinery Company Celebrates 125 Years of Innovation and Manufacturing Leadership
05/28/2025 | The French Oil Mill Machinery CompanyThe French Oil Mill Machinery Company marked its 125th anniversary this week, celebrating a rare legacy of continuous family ownership and manufacturing innovation.
Amtech Electrocircuits’ CEO Jay Patel Launches Petition Advocating for 10% Tax Credit to Support U.S. Electronics Manufacturers
05/28/2025 | Amtech ElectrocircuitsAmtech Electrocircuits, a leading provider of manufacturing solutions, announces that CEO Jay Patel has initiated a petition urging policymakers to implement a 10% tax credit for Original Equipment Manufacturers (OEMs) sourcing from U.S. electronics manufacturers.