The Marketing Minute: Marketing With Layers
The Right Approach: Electro-Tek—A Williams Family Legacy, Part 1
It’s Only Common Sense: If You’re Not Differentiated, You’re Dead
Runner-up Discusses IPC Design Competition
March 16, 2023 | I-Connect007 Editorial TeamEstimated reading time: 2 minutes
PCB designer Adam Thorvaldson of Innovex was a finalist in this year’s IPC Design Competition at IPC APEX EXPO. He came in second place in this final heat, which is quite a feat, considering that the contest started last fall with 49 contestants from around the globe. We asked Adam to share his thoughts on the competition, what it means to be one of the winners, and any ideas about improving the contest for 2024 in Anaheim.
Kelly Dack: Adam, you’ve finished up the design competition here at IPC APEX EXPO. What did you think of the experience?
Adam Thorvaldson: This experience has been very eye-opening. The event is great; the competition has been very interesting, and the town is beautiful.
Dack: How did you hear about the competition? What were the previous heats like?
Thorvaldson: I learned about the competition on LinkedIn. I like finding ways to better myself and develop new foundations for future growth. I applied, signed up, got the project files, and competed in the first round. My first round took about 49 hours of work, and later I found out I was a finalist.
Andy Shaughnessy: That was when we had 49 finalists?
Thorvaldson: Yes, and that was all wrapped up in November.
Dack: What about the EDA tools? For the final heat, everyone used Altium Designer.
Thorvaldson: But in the first round we were allowed to use any software package. I was able to use the tool that I was most familiar with, that I’ve been on for 25+ years, so it made it really easy for me. I’m not sure what everybody else was using in the earlier heats.
Dack: Designers often have to switch software in their careers. To participate in a competition like this, some of you had to learn the ropes of a new program fairly quickly.
Thorvaldson: Sure. For the competition, the finalists received a 30-day trial license to learn Altium beforehand. Unfortunately, I got my license only 10 days before the show, so it’s been a crash course. The tool I’m most familiar with is Allegro (and OrCAD) PCB Designer from Cadence. They’re a little different. I learned Eagle years ago. I’ve known about Altium for a long time, but I finally got my hands on it about 10 days ago and it’s very bewildering. There are some features that I like but I haven’t had enough time on the tool to become familiar with its behavior. For the competition today, I didn’t feel comfortable, but I didn’t give up.
Dack: You’re a true designer. First, because you didn’t give up, and you saw the importance of the task at hand. Given the tools that you had, you made the best of it. Congratulations for that.
Thorvaldson: Thank you.
To read this entire conversation, which appeared in the March 2023 issue of Design007 Magazine, click here.
Share on:
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
Knocking Down the Bone Pile: Revamp Your Components with BGA Reballing
10/14/2025 | Nash Bell -- Column: Knocking Down the Bone PileBall grid array (BGA) components evolved from pin grid array (PGA) devices, carrying over many of the same electrical benefits while introducing a more compact and efficient interconnect format. Instead of discrete leads, BGAs rely on solder balls on the underside of the package to connect to the PCB. In some advanced designs, solder balls are on both the PCB and the BGA package. In stacked configurations, such as package-on-package (PoP), these solder balls also interconnect multiple packages, enabling higher functionality in a smaller footprint.
New Course Presents a Comprehensive Guide to IPC Standards
10/10/2025 | Marcy LaRont, I-Connect007Francisco Fourcade, electronics technology standards manager for the Global Electronics Association, has spent years helping companies understand and implement the standards that keep the electronics manufacturing industry moving forward. In this interview, he shares updates on ongoing standards development efforts and previews a new course, "IPC Standards: A Guide for the Electronics Industry,” which starts Oct. 14.
North American EMS Industry Shipments Down 1.4% in August
10/02/2025 | Global Electronics AssociationThe Global Electronics Association announced the August 2025 findings from its North American Electronics Manufacturing Services (EMS) Statistical Program. The book-to-bill ratio stands at 1.26.
North American PCB Industry Sales Up 12.8% in August
10/02/2025 | Global Electronics AssociationThe Global Electronics Association announced the August 2025 findings from its North American Printed Circuit Board (PCB) Statistical Program. The book-to-bill ratio stands at 0.98.
Industry Leaders Shape a Sustainable Future at 2025 IPC CEMAC Electronics Manufacturing Annual Conference
09/30/2025 | Global Electronics AssociationThe 2025 IPC CEMAC Electronics Manufacturing Annual Conference, co-hosted by the Global Electronics Association and the Shanghai Pudong Association for Quality and Technology, successfully concluded on September 26 in Shanghai.