-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueRules of Thumb
This month, we delve into rules of thumb—which ones work, which ones should be avoided. Rules of thumb are everywhere, but there may be hundreds of rules of thumb for PCB design. How do we separate the wheat from the chaff, so to speak?
Partial HDI
Our expert contributors provide a complete, detailed view of partial HDI this month. Most experienced PCB designers can start using this approach right away, but you need to know these tips, tricks and techniques first.
Silicon to Systems: From Soup to Nuts
This month, we asked our expert contributors to weigh in on silicon to systems—what it means to PCB designers and design engineers, EDA companies, and the rest of the PCB supply chain... from soup to nuts.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - design007 Magazine
Optomec Adaptive DED Repair Capabilities Presented at ASTM Additive Manufacturing Workshop
April 6, 2023 | Business WireEstimated reading time: 1 minute
Optomec, a leading global supplier of production grade additive manufacturing systems for 3D printed metals, announced that the Company’s DED (Directed Energy Deposition) laser cladding solutions were presented at the ASTM 9th Annual CoE Additive Manufacturing Snapshot Workshop at Penn State last week.
Scott Baylor, Optomec Senior Applications Specialist, delivered a presentation titled “DED Adaptive Repair Capabilities for Turbine Engine Components”. Mr. Baylor’s presentation and demonstration provided insights into Optomec proprietary AutoCLADTM and AutoSHAPETM software used to automatically adapt tool paths and process parameters to compensate for blade-to-blade variations. Optomec DED solutions have been approved by civilian aviation authorities in 15 countries for the repair of Gas Turbine Engine components; over 10 million blades have been repaired using Optomec systems. Optomec’s automated laser cladding solutions reduce labor by 80% (no manual welders required), reduce finish machining time and cost, and increase repair throughput and repair quality.
Optomec LENS DED printing solutions can be used throughout the entire product lifecycle for applications including materials discovery, functional prototyping, manufacturing and hybrid manufacturing, surface coatings, rework and repair. With the use of a high power laser, process controls, and complete environmental control, the LENS system supports many high-performance metals including titanium, stainless steel, and Inconel® with the quality required for critical applications. Due to the nature of the LENS process, a high degree of control and process capability is possible.
The ASTM 9th AM Snapshot Workshop, hosted by Penn State University, was designed to provide a comprehensive “snapshot” of the progress in AM adoption and industrialization driven by the latest developments in technology. The event welcomed all professionals interested in the latest in AM technology advances from industry leaders, and provided a platform to collaborate and engage in meaningful discussion with industry experts. In addition, the workshop covered the standardization needs in accelerating AM adoption while incorporating recent developments.
Suggested Items
China Overtakes Germany and Japan in Robot Density
11/22/2024 | IFRChina's adoption of robots continues at a rapid pace: The country has surpassed Germany and Japan in the ratio of robots to factory workers, taking third place in the world in 2023.
PCB Design Software Market Expected to Hit $9.2B by 2031
11/21/2024 | openPRThis report provides an overview of the PCB design software market, detailing key market drivers, challenges, technological advancements, regional dynamics, and future trends. With a projected compound annual growth rate (CAGR) of 13.4% from 2024 to 2031, the market is expected to grow from USD 3.9 billion in 2024 to USD 9.2 billion by 2031.
SIA Applauds CHIPS Award for Semiconductor Research Corporation’s SMART USA Institute
11/21/2024 | SIAThe Semiconductor Industry Association (SIA) released the following statement from SIA President and CEO John Neuffer commending the announcement that the U.S. Department of Commerce and the Semiconductor Research Corporation Manufacturing Consortium Corporation (SRC) are entering negotiations for the Commerce Department to provide SRC $285 million to establish and operate the CHIPS Manufacturing USA Institute for Digital Twins.
SIA Praises Finalization of CHIPS Investments for GlobalFoundries Manufacturing Projects
11/21/2024 | SIAThe Semiconductor Industry Association (SIA) released the following statement from SIA President and CEO John Neuffer applauding finalization of semiconductor manufacturing investments announced by the U.S. Department of Commerce and GlobalFoundries.
IPC Issues Clarion Call for EU to Reclaim Leadership in Electronics Manufacturing
11/21/2024 | IPCIPC released a synopsis of its recent white paper, Securing the European Union’s Electronics Ecosystem. This condensed document presents a comprehensive overview of the current challenges in Europe’s electronics manufacturing industry and shares actionable steps to help the EU achieve a stronger, more autonomous ecosystem.