The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
all4-PCB Completes Pentagal HASL Installations
April 24, 2023 | all4-PCBEstimated reading time: Less than a minute
all4-PCB, supplier of PCB process equipment to the North American market, has installed Penta Hot Air Solder Leveling (HASL) systems at Flexible Circuits and Jet Technologies.
The Penta series of HASL equipment, manufactured by Pentagal of Bochum Germany, has a wide process window for panels of different sizes and thicknesses and flexible circuits. In addition to the Penta 580 or Penta 550 for solder coating, Pentagal offers a complete line of support equipment for the HASL process.
Flexible Circuits, Inc, Warrington, PA has been an industry leader in manufacturing flex circuits for over 55 years. Their customer base is mostly in the military and aerospace industries and require high-precision, high-quality flex circuits and assemblies.
Jet Technologies, Inc, New Berlin, WI is a supplier of single sided PCBs up to 18-layer PCBs, with quick turn as a specialty. As a family-owned business, Jet technologies has been in operation since 1971.
all4-PCB, headquartered in Glendale, CA, partners with their European and Asian suppliers to offer the North America PCB manufacturing base the finest in process equipment. In addition to equipment sales, all4-PCB also has a fully stocked warehouse of spares and a network of service technicians across North America.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.