Lockheed Martin's Next Generation Interceptor Program Completes All Subsystem Preliminary Design Reviews
August 9, 2023 | Lockheed MartinEstimated reading time: 1 minute

Lockheed Martin successfully validated designs for all elements of the nation's Next Generation Interceptor (NGI) with the U.S. Missile Defense Agency (MDA).
Through a series of successful and on-schedule Preliminary Design Reviews (PDRs) of all NGI major subsystems, the company demonstrated it has achieved design maturity and reduced risk for critical technologies. NGI is the future of the MDA's Ground-Based Missile Defense (GMD) system to protect the U.S. homeland against intercontinental ballistic missile threats from rogue nations.
"Lockheed Martin is making rapid progress with our NGI solution, remaining on an accelerated schedule toward flight testing," said Sarah Reeves, vice president of NGI at Lockheed Martin. "During these reviews, we took a modern and transparent approach through the use of advanced digital engineering and model-based engineering tools. Our NGI team will continue on-plan to demonstrate our revolutionary NGI architecture, leveraging mature technologies for high mission confidence."
Lockheed Martin is demonstrating engineering work that has been performed in the integrated digital tool chain to drive faster decision making, enhance security, and enable rapid delivery and agility. This approach emphasizes affordability across the program lifecycle. Lockheed Martin's NGI solution will increase warfighter capability, providing an improved defensive solution to address the complex battlespace now and in the future.
Lockheed Martin's NGI program is on track for its next major review, the All Up Round PDR. During this next major review, MDA will assess if the program is ready to move forward in the acquisition process through Knowledge Point number one and ultimately on to the Critical Design Review. The first Lockheed Martin NGI is forecast for delivery to the warfighter as early as FY2027.
Suggested Items
Flexible Circuit Technologies Welcomes Regional Business Development Manager Derek Rossberg
07/15/2025 | Flexible Circuit TechnologiesFlexible Circuit Technologies a Minnesota-based flexible circuit and advanced electronics contract manufacturer, welcomes Derek Rossberg as Regional Business Development Manager.
Digital Twin Concept in Copper Electroplating Process Performance
07/11/2025 | Aga Franczak, Robrecht Belis, Elsyca N.V.PCB manufacturing involves transforming a design into a physical board while meeting specific requirements. Understanding these design specifications is crucial, as they directly impact the PCB's fabrication process, performance, and yield rate. One key design specification is copper thieving—the addition of “dummy” pads across the surface that are plated along with the features designed on the outer layers. The purpose of the process is to provide a uniform distribution of copper across the outer layers to make the plating current density and plating in the holes more uniform.
Meet the Author Podcast: Martyn Gaudion Unpacks the Secrets of High-Speed PCB Design
07/10/2025 | I-Connect007In this special Meet the Author episode of the On the Line with… podcast, Nolan Johnson sits down with Martyn Gaudion, signal integrity expert, managing director of Polar Instruments, and three-time author in I-Connect007’s popular The Printed Circuit Designer’s Guide to... series.
Showing Some Constraint: Design007 Magazine July 2025
07/10/2025 | I-Connect007 Editorial TeamA robust design constraint strategy balances dozens of electrical and manufacturing trade-offs. This month, we focus on design constraints—the requirements, challenges, and best practices for setting up the right constraint strategy.
The Shaughnessy Report: Showing Some Constraint
07/14/2025 | Andy Shaughnessy -- Column: The Shaughnessy ReportWhen we first decided to cover strategies for setting PCB design constraints, one designer we spoke with said, “They’re not really constraints; they’re more like guardrails that prevent your design from going off a cliff.”