Defense Speak Interpreted: Is DARPA Still Around After CHIPS?
Beyond the Board: Orbital High Ground—Why Space Superiority Is Slipping Away
The Government Circuit: Trump’s Trade War Disrupts the Electronics Ecosystem
Keysight, MediaTek Verify Modem Technology Support for IoT and 5G over NTN
August 23, 2023 | Keysight Technologies, Inc.Estimated reading time: 1 minute
Keysight Technologies, Inc. and MediaTek have collaborated to verify that MediaTek's 5G modem technology supports 5G New Radio (NR) and internet of things (IoT) technologies based on the 3rd Generation Partnership Project's (3GPP) Release 17 (Rel-17) standards for non-terrestrial networks (NTN).
NTNs deliver secure, reliable, and high-bandwidth connectivity to remote areas that do not have terrestrial network coverage using satellites or high-altitude platforms. Ensuring that devices support 5G NR and IoT standards is a critical step to building NTNs to deliver ubiquitous mobile connectivity to businesses and individuals in rural areas. However, chipset and device makers must validate the functionality and performance of NTN devices before they are deployed onto commercial satellite communications networks.
Keysight integrates 5G network and real-world channel emulation hardware and software to create an end-to-end mixed terrestrial and space lab-based test bed to realistically simulate a wide range of orbit trajectories. The solution uses dynamic multipath propagation to emulate ground-to-satellite, satellite-to-ground, and ground-to-ground satellite links. This provides holistic performance verification of terrestrial and non-terrestrial infrastructure as well as 5G NTN devices.
The MediaTek 5G modem technology was verified using:
- S8711A UXM 5G Test Application emulated mobile networks for 5G NR and IoT technologies, allowing the device under test to establish an NTN data call connection.
- S8820A PROPSIM FS16 Channel Emulation Toolset emulated satellite orbits along with the channel effects and impairments of the air interface as radio frequency digital twins.
Ho-Chi Hwang, General Manager of Wireless Communication System and Partnerships at MediaTek, said: "The successful NTN collaboration with Keysight has helped us advance the development of our NTN technology, and positioned MediaTek as a pioneer in the development of commercial satellite communications services."
Peng Cao, Vice President and General Manager at the Keysight Wireless Test Group, said: "Keysight is excited to have collaborated with MediaTek for these successful verifications, delivering important milestones on the road to commercial NTN service deployments. This early verification accelerates the industry's move to the certification stage and commercial deployment."
Share on:
Suggested Items
United Electronics Corporation Advances Manufacturing Capabilities with Schmoll MDI-ST Imaging Equipment
06/24/2025 | United Electronics CorporationUnited Electronics Corporation has successfully installed the advanced Schmoll MDI-ST (XL) imaging equipment at their advanced printed circuit board facility. This significant technology investment represents a continued commitment to delivering superior products and maintaining their position as an industry leader in precision PCB manufacturing.
Insulectro & Dupont Host Technology Symposium at Silicon Valley Technology Center June 25
06/22/2025 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, and DuPont, a major manufacturer of flex laminates and chemistry, invite fabricators, OEMS, designers, and engineers to attend an Innovation Symposium – Unlock the Power - this Wednesday, June 25, at DuPont’s Silicon Valley Technology Center in Sunnyvale, CA.
OKI, NTT Innovative Devices Establish Mass Production Technology for High-Power Terahertz Devices by Heterogeneous Material Bonding
06/21/2025 | BUSINESS WIREOKI, in collaboration with NTT Innovative Devices Corporation, has established mass production technology for high-power terahertz devices using crystal film bonding (CFB) technology for heterogeneous material bonding to bond indium phosphide (InP)-based uni-traveling carrier photodiodes (UTC-PD) onto silicon carbide (SiC) with excellent heat dissipation characteristics for improved bonding yields.
The Evolution of Picosecond Laser Drilling
06/19/2025 | Marcy LaRont, PCB007 MagazineIs it hard to imagine a single laser pulse reduced not only from nanoseconds to picoseconds in its pulse duration, but even to femtoseconds? Well, buckle up because it seems we are there. In this interview, Dr. Stefan Rung, technical director of laser machines at Schmoll Maschinen GmbH, traces the technology trajectory of the laser drill from the CO2 laser to cutting-edge picosecond and hybrid laser drilling systems, highlighting the benefits and limitations of each method, and demonstrating how laser innovations are shaping the future of PCB fabrication.
Day 2: More Cutting-edge Insights at the EIPC Summer Conference
06/18/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) summer conference took place this year in Edinburgh, Scotland, June 3-4. This is the third of three articles on the conference. The other two cover Day 1’s sessions and the opening keynote speech. Below is a recap of the second day’s sessions.