Dr. Lawrence T. Pileggi of Carnegie Mellon University to be Honored with 2023 Phil Kaufman Award
September 6, 2023 | SEMIEstimated reading time: 3 minutes

Dr. Lawrence Pileggi, Coraluppi Head and Tanoto Professor of Electrical and Computer Engineering at Carnegie Mellon University, will be honored with the 2023 Phil Kaufman Award for distinguished contributions to Electronic System Design (ESD). The award will be presented at the annual Phil Kaufman Award presentation and dinner in Q1 2024.
Dr. Pileggi will be honored for his pioneering contributions to circuit simulation and optimization that have enabled the industry to address the challenge of interconnect delay dominated designs, and for his innovations in Electrical & Computer Engineering (ECE) education. The Phil Kaufman Award is presented annually by the Electronic System Design Alliance (ESD Alliance), a SEMI technology community, and the Council on Electronic Design Automation (CEDA) of the Institute of Electrical and Electronics Engineers (IEEE).
“Dr. Pileggi’s work over the last several decades has been pivotal to the advancement of circuit simulation and optimization in electronic design automation,” said Anirudh Devgan, President and CEO of Cadence Design Systems, a member of the ESD Alliance. “Larry is one of the most influential professors in our field; his work has had widespread, profound and lasting impact on the industry.”
“Larry Pileggi has had a broad and deep influence on EDA, spanning education, key inventions, research consortia, and commercial startups,” said Leon Stok, Vice President of EDA at IBM. “In each of these, he is not just participating but driving the outcome.”
“Dr. Pileggi has been a key innovator and EDA educator with numerous fundamental technical contributions in modeling, design and design methodologies for integrated systems and electrical power systems,” said Gi-Joon Nam, President of the IEEE Council on EDA. “Further, with over 30 years on the faculty of Carnegie Mellon University and the University of Texas at Austin, his numerous Ph.D. students continue to enhance the semiconductor industry.”
“On behalf of the ESD Alliance, I congratulate Dr. Pileggi on being honored with the 2023 Phil Kaufman award,” said Bob Smith, Executive Director of the ESD Alliance. “The industry would not be where it is today without his fundamental R&D, which has enabled much of the advanced technology we use every day.”
About Dr. Lawrence T. Pileggi
Prior to his current role as Coraluppi Head and Tanoto Professor of Electrical and Computer Engineering at Carnegie Mellon University, Dr. Pileggi held positions at Westinghouse Research and Development and the University of Texas at Austin. He has consulted for various semiconductor and EDA companies and co-founded Fabbrix Inc., Extreme DA, and Pearl Street Technologies. His research interests include various aspects of digital and analog integrated circuit design and simulation, optimization, and modeling of electric power systems.
Dr. Pileggi has received numerous awards, including the ACM/IEEE A. Richard Newton Technical Impact Award in Electronic Design Automation in 2011 and the 2015 Semiconductor Industry Association (SIA) University Researcher Award.
He co-authored Electronic Circuit and System Simulation Methods, McGraw-Hill, 1995 and IC Interconnect Analysis, Kluwer, 2002, has published over 400 conference and journal papers, and holds 40 U.S. patents. He is a fellow of the IEEE.
Dr. Pileggi received his BSEE and MSEE from the University of Pittsburgh in 1983 and 1984, respectively, and his Ph.D. from Carnegie Mellon University in 1989.
About the Phil Kaufman Award
The Phil Kaufman Award honors individuals who have had a demonstrable impact on the field of electronic system design through technology innovations, education/mentoring, or business or industry leadership. The award was established as a tribute to Phil Kaufman, the late industry pioneer who turned innovative technologies into commercial businesses that have benefited electronic designers. The 2022 recipient was Dr. Giovanni de Micheli, Professor and Director of the Institute of Electrical Engineering and of the Integrated Systems Centre at EPF Lausanne, Switzerland.
About the IEEE Council on Electronic Design Automation (CEDA)
The IEEE Council on Electronic Design Automation (CEDA) provides a focal point for EDA activities spread across seven IEEE societies (Antennas and Propagation, Circuits and Systems, Computer, Electron Devices, Electronics Packaging, Microwave Theory and Techniques, and Solid-State Circuits). The Council sponsors or co-sponsors over a dozen key EDA conferences including: the Design Automation Conference (DAC), Asia and South Pacific Design Automation Conference (ASP-DAC), International Conference on Computer-Aided Design (ICCAD), Design Automation and Test in Europe (DATE), and events at Embedded Systems Week (ESWEEK). The Council also publishes IEEE Transactions on Computer-Aided Design of Integrated Circuits & Systems (TCAD), IEEE Design & Test (D&T), and IEEE Embedded Systems Letters (ESL). The Council boasts a prestigious awards program in order to promote the recognition of leading EDA professionals, which includes the A. Richard Newton, Phil Kaufman, and Ernest S. Kuh Early Career Awards. The Council welcomes new volunteers and local chapters.
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
Accelerating Embedded Innovation: Orthogone Becomes Texas Instruments Design Partner
09/17/2025 | PRNewswireOrthogone Technologies Inc., a leader in advanced embedded systems and FPGA development, is proud to announce its official designation as a Texas Instruments (TI) Design Services Partner.
BLT Joins Microchip Partner Program as Design Partner
09/17/2025 | BUSINESS WIREBLT, a U.S.-owned and operated engineering design services firm announced it has joined the Microchip Design Partner Program.
Staying on Top of Signal Integrity Challenges
09/16/2025 | Andy Shaughnessy, Design007 MagazineOver the years, Kris Moyer has taught a variety of advanced PCB design classes, both online IPC courses and in-person classes at California State University-Sacramento, where he earned his degrees in electrical engineering. Much of his advanced curriculum focuses on signal integrity, so we asked Kris to discuss the trends he’s seeing in signal integrity today, the SI challenges facing PCB designers, and his go-to techniques for controlling or completely eliminating SI problems.
American Standard Circuits to Exhibit and Host Lunch & Learn at PCB West 2025
09/17/2025 | American Standard CircuitsAnaya Vardya, President, and CEO of American Standard Circuits/ASC Sunstone Circuits has announced that his company will once again be exhibiting at PCB West 2025 to be held at the Santa Clara Convention Center on Wednesday, October 1, 2025.
ASM Technologies Limited signs MoU with the Guidance, Government of Tamilnadu to Expand Design-Led Manufacturing capabilities for ESDM
09/15/2025 | ASM TechnologiesASM Technologies Limited, a pioneer in Design- Led Manufacturing in the semiconductor and automotive industries, announced signing of Memorandum of Understanding (MoU) with the Guidance, Government of Tamilnadu whereby it will invest Rs. 250 crores in the state to expand its ESDM related Design-Led Manufacturing and precision engineering capacity. ASM Technologies will acquire 5 acres of land from the Government of Tamilnadu to set up a state-of-the-art design facility in Tamil Nadu's growing technology manufacturing ecosystem, providing a strong strategic advantage and long-term benefits for ASM.