MKS’ Atotech to Participate in IPCA Expo 2023
September 14, 2023 | MKS’ AtotechEstimated reading time: Less than a minute
MKS’ Atotech, a leading surface finishing brand of MKS Instruments, will participate in the upcoming IPCA Expo at Bangalore International Exhibition Centre (BIEC) and showcase its latest PCB manufacturing solutions from September 13 – 15.
At booth EF 51 Atotech® product experts will be introducing the combination of wet chemical processes, production equipment (plating lines, lasers, auxiliaries) and software solutions. A spotlight is set on the various solutions available for e-mobility e.g. BEV, HEV and PHEV batteries and other components. This year highlights include:
- V-Plate®: Vertical continuous Cu plating technology of choice for advanced HDI & IC substrate
- GeodeTM: High-precision CO2 via drilling for HDI PCB manufacturing and IC packaging
- CapstoneTM: Flex PCB UV drilling tool for high-performance breakthrough productivity
- CupraEtch® DF 8000: Low etch rate and etch depth dry film pretreatment
- Noviganth® AF 76: High build self-accelerating electroless copper
- OS Tech® SIT 2: The OSP solution combinable with ENIG
- Stannopure® PF 10: High-speed green tin process for lead frames and connectors
- InPro® MVF 2: Next-generation blind micro via filling in VCP for HDI production
Suggested Items
The Cost-Benefit Analysis of Direct Metallization
10/21/2024 | Carmichael Gugliotti, MacDermid AlphaCarmichael Gugliotti of MacDermid Alpha discusses the innovative realm of direct metallization technology, its numerous applications, and significant advantages over traditional processes. Carmichael offers an in-depth look at how direct metallization, through developments such as Blackhole and Shadow, is revolutionizing PCB manufacturing by enhancing efficiency, sustainability, and cost-effectiveness. From its origins in the 1980s to its application in cutting-edge, high-density interconnects and its pivotal role in sustainability, this discussion sheds light on how direct metallization shapes the future of PCB manufacturing across various industries, including automotive, consumer electronics, and beyond.
Connect the Dots: Designing for Reality—Pattern Plating
10/16/2024 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we painted the picture of the outer layer imaging process. Now we are ready for pattern plating, where fabrication can get tricky. The board is now ready to receive the copper traces, pads, and other elements specified in the original CAD design. This article will lay out the pattern plating process and discuss constraints in the chemistries that must be properly managed to meet the customer's exacting manufacturing tolerances.
PCB007 Magazine October 2024: Alternate Metallization Processes
10/16/2024 | I-Connect007 Editorial TeamTraditional electroless copper and electroless copper immersion gold have been primary PCB plating methods for decades. But alternative plating metals and processes have been introduced over the past few years as miniaturization and advanced packaging continue to develop taking us into new directions. In this issue of PCB007 Magazine, we examine the impact of alternate metallization methods giving a glimpse into how and when we will arrive at 'destination metallization'.
Partial HDI: A Complete Solution
10/10/2024 | I-Connect007 Editorial TeamWe recently spoke with IPC instructor Kris Moyer about partial HDI, a process that’s recently been growing in popularity. Partial HDI allows designers to escape route out from tight-pitch BGAs on one layer, where a mechanically drilled plated through-hole is not an option, while avoiding the complexity and expense of sequential lamination cycles. As Kris explains, this process doesn’t add much to the cost, and it’s fairly straightforward. But there are some competing signal integrity and fabrication requirements to contend with. We asked Kris to walk us through this process.
Trouble in Your Tank: Interconnect Defect—The Three Degrees of Separation
10/01/2024 | Michael Carano -- Column: Trouble in Your TankIt has been well documented that, with a very expensive and complex printed circuit board, thermal and mechanical excursions often find weaknesses. A lack of robustness and poor process control often leads to the exploitation of those weaknesses. An interconnect defect (ICD) often goes undetected until the printed circuit board reaches the final assembly stage or undergoes multiple thermal cycles, including interconnect stress tests or thermal shock. It is impossible to rework the ICD defect. But unlike voids, if detected in time, the panels can be reprocessed.
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in