Trouble in Your Tank: Causes of Plating Voids, Pre-electroless Copper
Dan’s Biz Bookshelf: ‘Growth Hacker Marketing’
Happy’s Tech Talk #38: Novel Metallization for UHDI
Rigid-flex DFA
September 19, 2023 | Andy Shaughnessy, Design007Estimated reading time: 1 minute
Rigid-flex assembly brings its own set of issues, but designers can do quite a bit to make things easier on their downstream brethren. We asked IPC instructor Kris Moyer to give us the lowdown on DFA for rigid-flex circuitry.
Kris, what are some of the unique challenges related to assembling rigid-flex circuits?
There are several challenges to assembly of rigid-flex boards. First there is the alignment issue of the different sections of the boards. With a rigid board, the individual boards can be removed from the fabrication panel and run through the SMT assembly line without much problem, as long as the board is of sufficient size. In this case, the relative position of all the individual parts on the board remains consistent. But with rigid-flex, after the board is removed from the fabrication panel, the individual boards can move and rotate relative to each other within the limits of the flex material. This makes the placement of parts difficult to control. To overcome this, the board must be held in a restrained condition throughout the assembly process. This will require either the fabrication of a custom fixture to hold the board restrained during assembly or the design of temporary removable restraining mechanisms (rails) into the design of the board.
To read this entire conversation, which appeared in the September 2023 issue of Design007 Magazine, click here.
Share on:
Suggested Items
TTM Technologies Announces Retirement of Founder and Board Member, Kent Alder
05/09/2025 | Globe NewswireTTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, quick-turn and technologically advanced printed circuit boards (PCB), announced the retirement of its founder, former CEO and long-serving board member, Kent Alder.
Discover TRI Test Solutions at New-Tech 2025
05/08/2025 | TRIBynet Testing Systems, TRI's industry partner, will join New-Tech 2025 at EXPO Tel-Aviv, Pavilion 1 from May 20 – 21, 2025.
Voices of the Industry: Alpha Circuit
05/06/2025 | Marcy LaRont, PCB007 MagazinePrashant Patel, founder and president of Alpha Circuit, takes a pragmatic approach to doing business: “Commerce always wins out,” he says. How will potential tariffs and shifts in the economy affect PCB manufacturing? Prashant offers sound advice.
Choosing the Right Strategic Path
04/29/2025 | Marcy LaRont, PCB007 MagazineTom Yang, CEO of CEE PCB, discusses the current economic challenges, noting reduced purchasing power post-pandemic. He highlights the growing demand for HDI in consumer electronics due to AI growth. Tom also expresses concerns about tariffs under the new U.S. administration, prompting CEE to diversify production locations, including new plants in Southeast Asia. He emphasizes the need for PCB manufacturers to adapt strategically amidst rising costs and fierce competition, particularly for mid-sized shops facing unique challenges in the industry.
Candor Elevates PCB Fabrication Services with Continued Facility Upgrades
04/28/2025 | Candor CircuitsOntario-based circuit board manufacturer, Candor Circuit Boards has recently completed a series of facility upgrades to improve their PCB offerings. These investments will allow Candor to provide higher volumes of complicated boards more efficiently with better yield. The new technology has allowed the company to take on exciting high technology projects and collaborations in industries such as Military and Aerospace, Medical, Energy and more.