NEC Develops 150 GHz Antenna-on-Chip Transmitter IC Chip for Beyond 5G/6G Radio Equipment
October 12, 2023 | JCN NewswireEstimated reading time: 1 minute
NEC Corporation has developed a 150 GHz transmitter IC chip and supporting technologies in preparation for Beyond 5G and 6G mobile access radio communication systems. According to an NEC survey, this is the first demonstration of preferred beam steering performance with 4-channel Antenna-on-Chip (AoC) IC technology using On the Air (OTA) radiation pattern measurement. Based on innovative RF circuit design technology, it has become possible to integrate 150 GHz phased array antenna elements, phase shifters and transmission amplifiers into a single chip. The 22-nm SOI-CMOS technology used for manufacturing this IC is cost effective, suitable for mass production, and has the ability to support large scale integration of digital, analog and RF functionalities in a chip. This allows for both higher frequencies and smaller sizes, which also contributes to lower Total Cost of Ownership (TCO) and potentially accelerates social implementation.
Beyond 5G and 6G are expected to provide 100 Gbps class broadband communications that are more than ten times faster than 5G. To achieve this, it is effective to utilize the sub-terahertz band (100GHz to 300GHz), which can secure a wide bandwidth of 10GHz or more. In particular, the D-band (130 GHz to 174.8 GHz), which is already assigned for fixed wireless communication systems worldwide, is expected to contribute to early social implementation. However, since the sub-terahertz band is subject to large propagation losses, large interconnection losses and device performance is near its limit, there is a need for the development of highly directional, high-gain antenna technology and its beam steering technology. To overcome these challenges, NEC developed a new IC chip that supports the 150GHz band. Going forward, NEC will continue to develop advanced technologies with the aim of contributing to the commercialization of 6G that is expected in the 2030s.
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
IBM, Aramco Explore Collaboration to Accelerate AI and Innovation Across Saudi Arabia
05/07/2026 | IBMAramco and IBM announced their intended collaboration on opportunities to advance artificial intelligence, agentic AI, automation, material science and other mutually agreed domains in the industrial sector.
Foxconn Launches Second-Gen LEO Satellite, Begins Inter-Satellite Link Testing
05/05/2026 | FoxconnFoxconn Technology Group, the world's largest electronics manufacturing services provider, announced that its second-generation low-Earth orbit (LEO) satellites, "Pearl-1A" and "Pearl-1B," were successfully launched into their designated orbits via SpaceX's Falcon 9 rocket on the evening of May 3 (Taipei time).
AdvancedPCB Advances Precision Drilling Capabilities Across Two U.S. Facilities with Schmoll
05/05/2026 | AdvancedPCBAdvancedPCB has completed the installation of two Falcon small-hole drilling systems from Schmoll Maschinen GmbH at its U.S. facilities in Maple Grove, Wisconsin and Santa Clara, California.
GlobalFoundries Advances Co-Packaged Optics for AI Data Centers with SCALE Module
05/04/2026 | GlobalFoundriesGlobalFoundries (Nasdaq: GFS) (GF) announced the introduction of its SCALE™ optical module solution for co-packaged optics (CPO).
Next Generation Microelectronics: AT&S Honors Top Apprentices
05/04/2026 | AT&SThe Austrian high-tech company AT&S is a global player in the world of microelectronics. Driven in particular by the boom in applications related to artificial intelligence (AI), IC substrates and high-tech printed circuit boards from AT&S are currently in strong demand.