Smartphone Demand Rebounds in 2H23, Q3 Production Rises 13% with Continued Growth Expected in Q4
December 7, 2023 | TrendForceEstimated reading time: 2 minutes
TrendForce reports that smartphone production—fueled by reduced channel inventories and spikes in seasonal demand—saw a significant uptick in 3Q23. Global smartphone production in the third quarter reached approximately 308 million units, marking a 13% QoQ increase. Although this figure has yet to reach pre-pandemic levels, it represents a 6.4% YoY increase, effectively ending an eight-quarter streak of annual declines.
Looking ahead to 4Q23, e-commerce promotions and the year-end shopping boom, coupled with the customary end-of-year surge in production by smartphone brands, are likely to stimulate a further 5–10% QoQ increase in production. The projected downturn in global smartphone production for 2023 is expected to be limited to less than 3%, with total annual output estimated to reach approximately 1.16 billion units.
Huawei’s market return puts pressure on Apple’s market share in China for next year
Samsung, leveraging its presence in the flagship smartphone market, continues to lead the market after recording an 11.5% increase in its Q3 production at 60.1 million units. Despite Samsung’s extensive global reach, the company’s conservative planning in light of global economic headwinds has narrowed its annual production lead over Apple to a mere 5 million units.
Apple, riding the wave of its latest flagship releases, saw its Q3 production climb 17.9% to reach approximately 49.5 million units. However, the initial low yield rates of the CIS in the iPhone 15/15 Plus series adversely affected Apple’s Q3 performance, resulting in a 1.5% YoY market share decline, with annual production expected to align with 2022 levels.
Huawei’s re-entry with its flagship phones has made a significant impact on the high-end smartphone market in China, with Apple being the primary target. As Huawei aims to expand its high-end flagship series in 2024 with a focus on the Chinese domestic market, the company is set to directly Apple. This strategy, coupled with prevailing geopolitical factors, positions Huawei as a formidable competitor and is anticipated to significantly impact Apple’s production performance in the upcoming year.
Transsion outperforms Vivo in the third quarter to clinch the fifth spot globally
Following the completion of channel inventory adjustments, Xiaomi (including Xiaomi, Redmi, and POCO) has shifted to a more assertive stance in both device production and component stockpiling as the year draws to a close. Xiaomi’s Q3 production jumped by 22.3% to approximately 42.8 million units—bolstered by the resurgence of the Indian market—solidifying its status as the world’s third-largest producer. Oppo (including Oppo, Realme, and OnePlus) experienced a 15.2% increase in its Q3 output to 38.7 million units. This growth, fueled by rising sales in markets like India and South America, is anticipated to maintain its momentum into the fourth quarter.
Transsion (including TECNO, Infinix, and itel) continued its robust performance from Q2 into the third quarter, achieving production output of 26.5 million units—a 5.6% increase QoQ. This surge enabled Transsion to overtake Vivo again and secure the fifth spot globally. The brand has been thriving in emerging markets and steadily growing its market share since the second quarter. With the potential for an annual growth rate exceeding 40%, Transsion remains in close competition with Vivo for global rankings.
Vivo (including Vivo and iQoo) saw its Q3 production rise to 24.5 million units, marking a 6.5% increase and placing it in the sixth spot. The company adopted a more conservative production plan in 1H23 in response to the global economic downturn. Even as the market in China, one of its primary regions began to improve in the latter half of the year, Vivo maintained its strategy aimed at ensuring steady profits.
Suggested Items
Flex PCB Design Best Practices
12/04/2024 | Brittany Martin, I-Connect007David Lackey, a flex circuit expert at American Standard Circuits, speaks about the advantages and challenges of designing with flexible and rigid-flex PCBs. He also discusses how consulting before the design phase can save time and costs by avoiding manufacturing issues and highlights the reliability and packaging benefits of flex technology, especially for compact designs in sectors like aerospace.
The Training Connection Difference
12/04/2024 | Andy Shaughnessy, I-Connect007Bert Horner, president of The Test Connection, has recently launched The Training Connection, a new company that addresses critical training needs in test engineering and development. With a focus on essential methodologies like design for test (DFT) and IPC standards, the initiative promises to enhance the skills of professionals in the field. At PCB Carolina, Bert talked about the program, its positive reception, and the growing demand for practical, effective training solutions within the industry.
Polymatech Electronics Partners with South Wales SME 'SimplyRFMW' to Advance 5G and 6G RF Power Amplifier Designs
12/04/2024 | PRNewswirePolymatech Electronics, a global pioneer in semiconductor chip manufacturing headquartered in Chennai, India, has announced a strategic partnership with SimplyRFMW Limited, a South Wales-based SME renowned for its expertise in RF and microwave engineering.
HyRel Announces Sale of First Versacell Robotic System to Leading Defense Contractor
12/03/2024 | HyRelHyRel Technologies, a global provider of quick-turn semiconductor modification solutions, is proud to announce the sale of its first Versacell Robotic Solder Dip & BGA Reballing System to one of the top five defense contractors. Originally developed for internal use, the revolutionary Versacell System drew the attention of the contractor, who recognized its impressive precision, accuracy, and efficiency.
iSQUARED Expands Specialized Material Offerings Validated for Stratasys 3D Printers
12/03/2024 | BUSINESS WIREiSQUARED, a wholly-owned subsidiary of Stratasys, announced today an expansion of its portfolio of materials validated for use in Stratasys 3D printers, alongside the launch of a marketplace for pre-owned Stratasys machines.