The Economics of Equipment Selection
January 8, 2024 | Barry Matties, I-Connect007Estimated reading time: 1 minute
Financing capital equipment is certainly a large part of a fabricator’s economic equation. However, the selection of your equipment has a long-term economic impact, especially if you overlook a few critical points.
As IPS President and CEO Mike Brask recently explained, the first step in this process is to really understand your technological needs and the flexibility that’s required for your equipment to carry you into the future. For example, in a recent ENEPIG line that IPS delivered, the customer wanted the capability to add new chemistry tanks in the next few years, so IPS designed flexibility into a line that allowed for that upgrade down the road. By thinking beyond current needs, the customer will save a lot of money and valuable runtime.
If you are selecting equipment for a brownfield site bound by space constraints, working with your equipment supplier up front can really pay off. Equipment specialists will help you optimize the features you need and eliminate the ones you don’t, all while working within the space constraints.
To that end, in the equipment selection process be sure to work with all your stakeholders as a team. Look at the entire plan so that you are not a one-move chess player. Think about your needs beyond today’s purchase and build a technology roadmap for future purchases as well. This will help you plan your utilities, venting, DI, water, and waste treatment, thus saving you resources and maximizing your runtime.
To continue reading, click here.
This article first appeared in the December 2023 issue of PCB007 Magazine.
Suggested Items
RTX Introduces the Collins Airport Surface Awareness System
05/10/2024 | RTXCollins Aerospace, an RTX business, introduces Collins’ Airport Surface Awareness System for real-time tracking, monitoring, and recording of both aircraft and ground support equipment at airports.
MKS’ Atotech, ESI to Participate in CPCA Show
05/09/2024 | MKS’ AtotechMKS’ Atotech, and ESI will participate in the CPCA Show 2024. The show will be held from May 13 to 15, 2024, at the National Exhibition and Convention Center (Shanghai) and will bring together domestic and international manufacturers in the electronic circuit industry.
New Appointment Strengthens Ventec’s Value-Added Equipment Division
04/29/2024 | VentecVentec announces the appointment of Leigh Allinson as Commercial Director for its value-added PCB Equipment division 'Ventec Giga Solutions'.
Real Time with... IPC APEX EXPO 2024: all4-PCB, A Premier Solution Provider for the PCB Industry
04/22/2024 | Real Time with...IPC APEX EXPOIn the PCB industry, all4-PCB, is a top-tier equipment supplier and process solution provider. Ralph Jacobo highlights the active market and the demand for high-quality equipment, discusses their existing customers, investment in advanced substrates, and smaller board shops.
Global Semiconductor Equipment Billings Slip to $106.3 Billion in 2023
04/10/2024 | SEMIWorldwide sales of semiconductor manufacturing equipment edged down 1.3% to $106.3 billion in 2023 from an all-time record of $107.6 billion in 2022, SEMI, the industry association representing the global electronics design and manufacturing supply chain, reported today. The data is now available in the Worldwide Semiconductor Equipment Market Statistics (WWSEMS) report.