Flexible Thinking: Rules of Thumb—A Word to the Wise
Happy’s Tech Talk #29: Bend-to-Install Semi-flex FR-4
Connect the Dots: Five Best Practices for Designing Flex and Rigid-flex PCBs
Rogers Announces Changes to Board of Directors
January 18, 2024 | Rogers CorporationEstimated reading time: 1 minute
Rogers Corporation announced that it has appointed Donna M. Costello as an independent member of the Company’s Board of Directors and as a member of the Board’s Audit Committee, effective January 13, 2024. Ms. Costello replaces Ganesh Moorthy, who has stepped down from the Company’s Board following more than ten years of service. Following these changes, the Board continues to be composed of nine members, eight of whom are independent.
“We are excited to welcome Donna to the Rogers Board. She brings extensive executive-level financial expertise and nearly two decades of experience at global technology and specialty materials companies,” said Peter Wallace, Chair of the Board. “We look forward to Donna’s contributions and insights as we continue to execute our strategy to deliver long-term shareholder value.”
Mr. Wallace added: “On behalf of the entire Board, I’d like to thank Ganesh for his leadership and the impact he had on Rogers during his tenure. The Company has benefited greatly from his contributions over the years.”
About Donna Costello
Ms. Costello has extensive experience in corporate finance, technical financial management, risk management and audit. She most recently served as Chief Financial Officer of C&D Technologies, Inc., a global leader in energy storage solutions and services for the telecommunications, utility, uninterruptible power supply, cable, broadband, and renewable energy markets. Previously, she served as CFO and Vice President as well as Controller and Chief Accounting Officer at Sequa Corporation, which, through its subsidiary Chromalloy, is a global technology company and a leading solutions provider for aircraft engines and gas turbines. Earlier in her career, Ms. Costello held the role of Senior Manager with Arthur Andersen, LLP.
Ms. Costello currently serves on the Board of CTS Corporation. She previously served on the Board of Neenah, Inc., a global manufacturer of specialty materials, as Chair of the Audit Committee and as a member of the Compensation Committee. She also served on the Board of Horizon Global Corporation, a towing and trailering equipment producer, as a member of the Audit Committee.
Share on:
Suggested Items
Rogers Announces Addition of Woon Keat Moh to Board of Directors
12/23/2024 | Rogers CorporationRogers Corporation announced that Woon Keat Moh ("Moh") has been appointed as an independent member of the Company’s Board of Directors, effective January 1, 2025. Following this change, the Board will be composed of nine members, eight of whom are independent.
CACI Chairman, Michael A. Daniels, Receives Prestigious Lifetime Achievement Recognition from NACD
12/20/2024 | CACI International Inc.CACI International Inc announced that CACI Chairman of the Board of Directors Michael (Mike) A. Daniels was presented with the prestigious 2024 National Association of Corporate Directors (NACD) Directorship 100™ B. Kenneth West Lifetime Achievement Award at its annual gala in New York.
Aspocomp’s Shareholders’ Nomination Board’s proposals to the Annual General Meeting 2025
12/19/2024 | AspocompThe Shareholders’ Nomination Board of Aspocomp Group Plc submits the following proposals to the Annual General Meeting, planned to be held on April 29, 2025. The proposals will also be included in the Notice to the Annual General Meeting 2025 to be published at the later date.
Global PCB Connections: Following DFM Rules Leads to Better Boards
12/18/2024 | Jerome Larez -- Column: Global PCB ConnectionsAs a PCB field applications engineer, ensuring smooth communication between PCB designers and fabricators is one of my frequent challenges. A critical part of that dialogue is design for manufacturing (DFM). Many designers, even experienced ones, often misunderstand or overlook important DFM considerations. They may confuse design rules with manufacturing minimums, leading to technically feasible designs that are difficult or costly to produce. In this column, I will clarify some common DFM guidelines and help designers understand the difference between “design rules” and “minimums” while sharing best practices that will simplify the production process and ensure the highest quality PCB.
Cadence Appoints Moshe Gavrielov to Board of Directors
12/13/2024 | Cadence Design SystemsCadence Design Systems, Inc. announced the appointment of Moshe Gavrielov to its board of directors, effective January 1, 2025. Mr. Gavrielov currently serves as a member of the board of NXP Semiconductors N.V. and Taiwan Semiconductor Manufacturing Company Ltd., as chair of the board of Foretellix and SiMa.ai, and has previously held executive roles at several global technology companies.