The Knowledge Base: My 2025 Industry Wish List
Global Sourcing Spotlight: The Surprising World of Offshore B2B Industrial Values
Nolan’s Notes: Emerging Trends in 2025
iNEMI LTS Tech Topic Series: Thermal Fatigue Performance in BiSn-Based Low-Temperature Solder Joints
February 5, 2024 | iNEMIEstimated reading time: 1 minute
There is an increasing interest in some market segments to use solder alloys with lower melting temperatures for electronics assembly. Low-temperature solder (LTS) can provide manufacturing, economic, and environmental benefits. Since 2015, the iNEMI BiSn-Based Low-Temperature Soldering Process and Reliability project has been evaluating LTS paste formulations based on the Bi-Sn system. This webinar will report the results and lessons learned from the thermal cycling tests of low-temperature solders completed to date on three types of LTS solder joints: homogeneous, hybrid (heterogeneous), and hybrid formed with joint reinforced pastes (JRP). Get additional details about testing to be discussed in this webinar.
About the Speaker
Richard Coyle, PhD, is widely recognized in the industry for his expertise in metallurgy and electronics material science. He began his career at Bell Labs approximately 30 years ago with research spanning areas such as laser and electronics materials processing. His work on the reliability and the critical understanding of the structural property relations of solders is well recognized across the industry. He currently leads root cause analyses, advanced reliability risk assessments, attachment reliability testing of electronic assemblies, and experimental studies of emerging Pb-free solder alloys as part of the Nokia Bell Labs Reliability organization. He received his Ph.D. in Metallurgical Engineering and Materials Science from the University of Notre Dame.
Registration
This webinar is open to industry; advance registration is required (see links below). Two sessions are scheduled (with the same content). If you have any questions, please contact Haley Fu,
Session 1
Tuesday, February 20, 2024
9:00-10:00 a.m. CST (China)
8:00-9:00 p.m. EST (US) on February 19
Session 2
Tuesday, February 27, 2023
10:00-11:00 a.m. EST (US)
4:00-5:00 p.m. CET (Europe)
Share on:
Suggested Items
Indium to Showcase Power Electronics Products at NEPCON Japan
01/14/2025 | Indium CorporationAs one of the leading materials providers in the electronics assembly industry, Indium Corporation® is proud to feature its lineup of high-reliability products for power electronics at NEPCON Japan, taking place January 22-24, in Tokyo, Japan.
The Knowledge Base: My 2025 Industry Wish List
01/14/2025 | Mike Konrad -- Column: The Knowledge BaseMy 2025 wish list for the electronics manufacturing industry is short. In fact, there’s only one item on the list: reliable EV charging stations. I love to drive cars, off-road vehicles, and boats. I also fly airplanes, and I’m an unabashed tech geek. From computers to tech gadgets, count me in. Because electric vehicles combine my fascination for both propulsion and technology, most of my friends and colleagues are surprised to learn that I do not yet have an electric vehicle. So, what’s holding me back? The answer does not lie with the electric vehicle itself, but with the current state of public EV charging stations.
Focus on electronica: Future Challenges From a Designer’s Viewpoint
01/09/2025 | I-Connect007 Editorial TeamThomas Romont is CEO of WorldWide Electronic Circuits in Nantes, France, and chair of the IPC Designers Council France. He gave a presentation at electronica titled Challenges for the Future From a PCB/PCBA Designer Perspective. We asked Thomas to share his thoughts about the class, why this topic is so important, and what he hoped attendees would take away from his class.
SMTA Ontario Presents Webinar on Achieving Enhanced Reliability with a Novel Lead-Free, Bismuth-Free, Low-Temperature Solder
01/09/2025 | SMTAThe Ontario Chapter of the Surface Mount Technology Association (SMTA) invites electronics industry professionals to a technical webinar featuring Emily Belfield, Regional Sales Manager at Indium Corporation.
NEOTech Commemorates a Decade of Growth and Strong Partnerships, Driving Innovation in Electronics Manufacturing
01/07/2025 | NEOTechNEOTech, a leading provider of electronic manufacturing services (EMS), design engineering, and supply chain solutions in the high-tech industrial, medical device, and aerospace/defense markets, is celebrating a decade of innovation, growth, and strong partnerships with high-tech OEMs around the globe.