The Knowledge Base: Unlocking the Invisible—The Critical Role of X-ray Technology
Standard of Excellence: Turning Negative Customer Feedback Into Positive Outcomes
Smart Automation: The Growing Role of Additive Manufacturing
AIM to Highlight NC259FPA Ultrafine Solder Paste & Present on Low Temp Solder at IPC APEX 2024
February 9, 2024 | AIMEstimated reading time: 1 minute
AIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming IPC APEX EXPO 2024 taking place April 9-11 at the Anaheim Convention Center in Anaheim, California. Among other great products, AIM will be highlighting its recently released NC259FPA Ultrafine No Clean Solder Paste.
NC259FPA is a zero-halogen paste engineered for precise print definition with type 6 and smaller alloy powders through stencil apertures less than 150 µm in diameter. Ideal for miniLED, microLED, die attach, micro BGA, and HDI boards, this innovative new product features excellent wetting, high transfer efficiency, high reliability, and high tack force for mass transfer.
AIM’s Timothy O’Neill and Gayle Towell will also be presenting a paper titled “Advancing the Understanding of Low-Temperature Solder in Electronics Rework and Assembly.” This presentation will outline the current low-temperature solder landscape, unveil new research and the case for low temperature rework, and discuss use cases and the future prospects of low-temperature solder more broadly.
Timothy O'Neill is the Director of Product Management for AIM Solder. Mr. O’Neill has over 25 years of industry experience and is a Certified IPC Specialist. He is a technical writer and presenter for industry trade publications and events and has been recognized as a Speaker of Distinction by the SMTA. Gayle Towell is AIM Solder’s Content Specialist. Holding master’s degrees in both mathematics and physics from the University of Oregon, Mrs. Towell facilitates communications, develops presentations, and ensures AIM's technical papers and documentations meet the highest scientific standards.
To learn more about NC259FPA and to discover all of AIM’s products and services, visit the company at the IPC APEX EXPO, booth 1623 April 9-11, or visit www.aimsolder.com. To catch the presentation on low temperature solder, attend Assembly Materials Session 1 on Wednesday, April 10 from 1:30-3:00PM.
Share on:
Suggested Items
KOKI Expands U.S. Sales Coverage with Multiple New Representatives
04/29/2025 | KOKIKOKI, a global leader in advanced soldering materials and process optimization services, is pleased to announce the expansion of its U.S. sales network with the addition of three new manufacturers’ representative firms: Assembled Product Specialists, Diversitech Reps Inc., and Eagle Electronics.
INEMI Call-for-Participation Webinar: BiSn-Based Low-Temperature Soldering Process and Reliability Project Phase 3b
04/28/2025 | iNEMIIn 2015, INEMI initiated the BiSn-Based Low-Temperature Soldering Process and Reliability Project to assess the feasibility of using low-temperature solders (LTS) in the SnBi system to address various technological, economic and ecological drivers for assembly of consumer computer electronic board products.
KYZEN to Feature Stencil Cleaning and Aqueous Cleaners at SMTA Capital Expo and Tech Form
04/28/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Capital Expo and Tech Forum, scheduled to take place Thursday, May 8 at George Mason University – Mason Square in Arlington, VA.
KYZEN Focuses on Aqueous Cleaning and Stencil Cleaning at SMTA Wisconsin
04/24/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Wisconsin Expo and Tech Forum, scheduled to take place Tuesday, May 6 at the Crowne Plaza Milwaukee Airport. KYZEN will be on-site to provide attendees with information about aqueous cleaning chemistry AQUANOX A4618 and stencil cleaner KYZEN E5631J.
SMTA Bridging the Skills Gap in Arizona
04/24/2025 | Marcy LaRont, I-Connect007One area where SMTA really excels is through its local chapters. On April 16, 2025, I-Connect007's Marcy LaRont attended the Workforce Breakfast during the SMTA Arizona Expo & Tech Forum in Mesa, which featured more than 50 electronics professionals from the local area, including defense OEMs, and others who were attending for the first time. Blackfox and Hyrel Technologies sponsored the event. The keynote presentation featured Sean Denny, a professor at Estrella Mountain Community College, who emphasized a clear need for skilled hand soldering technicians.