Share on:

Share on LinkedIn Share on X Share on Facebook Share with email

Testimonial

"Your magazines are a great platform for people to exchange knowledge. Thank you for the work that you do."

Simon Khesin - Schmoll Maschinen

Suggested Items

From Dilution to ZLD: Optimizing Used Process Water Management

06/10/2026 | Richard Nichols, GreenSource Engineering
Last month, we began discussing the journey from dilution to zero liquid discharge. I highlighted that approximately 70% of the used process water (UPW) is generated from the dilute stream. This significant volume underscores the necessity for effective treatment processes that ensure the safe return of water into the production cycle while minimising environmental impact.

GreenSource Fabrication to Showcase Advanced PCB Manufacturing Capabilities at IMS 2026

06/05/2026 | GreenSource Fabrication
GreenSource Fabrication today announced that it will exhibit at IMS 2026, the IEEE International Microwave Symposium (IMS), taking place June 7–13, 2026, at the Thomas M. Menino Convention and Exhibition Center in Boston, Massachusetts.

The Journey from Dilution to Zero Liquid Discharge

05/11/2026 | Richard Nichols, GreenSource Engineering
If you’re familiar with the PCB industry, and a little long in the tooth like me, you may remember the cry, “The water board is here!” (or an equivalent authority). This was the signal for a frantic but regularly rehearsed exercise to turn on all the rinses. This anecdote demonstrates that in the early days of PCB production, prevailing practices revolved around a “dilution is the solution” mentality, in which manufacturers used copious amounts of water to dilute contaminants before discharging them into regulated municipal wastewater systems or natural water bodies.

GreenSource Fabrication to Exhibit at PCB East 2026

04/23/2026 | GreenSource Fabrication
GreenSource Fabrication, the N. American industry’s most advanced, state-of-the-art printed circuit board manufacturer, today announced that it will be exhibiting at PCB East 2026, on Wednesday April 29,2026 at the DCU Convention Center 50 Foster Street in Worcester, MA.

Institute of Circuit Technology Spring Seminar 2026: A Bright Future in Europe

04/23/2026 | Pete Starkey, I-Connect007
Through the leafy lanes and spring flowers of Warwickshire and back to Meridan, the traditional centre of England, and now officially part of the Metropolitan Borough of Solihull in the county of the West Midlands, I attended the Annual General Meeting and Spring Seminar of the Institute of Circuit Technology (ICT) on April 14. Out of the AGM came notable changes in leadership at the top of the Institute: the retirement of Mat Beadel as chair and Emma Hudson as technical director. Effective May 1, Steve Driver is the new chair, and Alun Morgan is the new technical director.
Subscribe | Magazines | RealTime with | JobConnect007 | Education | Webinars
Copyright © I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in