Aspocomp’s Q1 Net Sales and Operating Result Decreased YoY
April 18, 2024 | AspocompEstimated reading time: 4 minutes
Aspocomp Group Plc, releases interim report for first quarter 2024.
FIRST QUARTER 2024 HIGHLIGHTS
- Net sales EUR 6.2 (8.9) million, decrease of 30%
- Operating result EUR -1.6 (0.3) million, -25.9% (3.8%) of net sales
- Earnings per share EUR -0.24 (0.04)
- Operative cash flow EUR -2.0 (1.6) million
- Orders received EUR 7.5 (13.7) million, decrease of 45%
- Order book at the end of the review period EUR 11.8 (19.1) million, decrease of 38%
- Equity ratio 64.5% (72.9%)
OUTLOOK FOR 2024
Inflation and interest rates, weak economic development, the uncertainties posed by Russia’s war of aggression and the situation in the Middle East, and global trade policy tensions will affect the operating environment of Aspocomp and its customers in the 2024 fiscal year. The company estimates that the demand in the Semiconductor segment will gradually recover starting from the first half of 2024, while at the same time unloading high inventory levels in various parts of the value chain. In order for investments to pick up in several of Aspocomp’s customer segments, consumer demand must improve, and interest rates decline, among other factors. Demand for Aspocomp’s products is expected to recover gradually during 2024.
Aspocomp reiterates the guidance that was published on March 14, 2024. Aspocomp estimates that its net sales for 2024 will increase from 2023 and its operating result will improve from 2023. In 2023, net sales amounted to EUR 32.3 million and the operating result was a loss of EUR 1.7 million.
CEO’S REVIEW
“January-March net sales decreased by 30 percent year-on-year and amounted to EUR 6.2 (8.9) million. Net sales development was depressed especially by weak demand in the semiconductor industry and a weaker product mix than in the comparison period.
Although the decline in net sales in the Semiconductor Industry customer segment was strong in the first quarter, market data indicates that its business cycle has already turned around. For example, according to the Semiconductor Industry Association, which follows the semiconductor industry, global sales of semiconductors grew by 15-16 percent in January-February compared to the reference period of 2023, and the association predicts that growth will continue at a similar level throughout 2024. However, the positive development of the semiconductor market is not immediately reflected in PCB sales, as inventory levels are still high in various parts of Aspocomp’s customers' value chain. When inventory levels gradually return to normal, the recovery of the semiconductor cycle is expected to be gradually in the demand for Aspocomp’s products as well. Even in the longer term, the semiconductor industry's growth prospects are strong.
Of the other customer segments, Industrial Electronics developed the best in the first quarter. The active sales work of the Security, Defense and Aerospace customer segment was reflected in net sales, which increased from the comparison period. The Telecommunication customer segment continued to be weighed down by the weak demand situation among end customers.
First-quarter operating result remained a loss, at EUR 1.6 (+0.3) million. The operating result was burdened by a decrease in net sales, the weakened product mix and higher material costs caused by a process failure that continued since the end of last year. The process failure is not expected to affect Aspocomp's financial development in the second quarter of 2024.
Inflation and interest rates, the economic recession, the uncertainties posed by Russia’s war of aggression and the situation in the Middle East, and global trade policy tensions will affect the operating environment of Aspocomp and its customers in the 2024 fiscal year. Demand for Aspocomp’s products is expected to recover gradually during 2024. We reiterate the guidance that was published on March 14, 2024, that Aspocomp’s net sales will increase from 2023 and its operating result improve from 2023. In 2023, net sales amounted to EUR 32.3 million and the operating result was a loss of EUR 1.7 million.
My ten-year journey in Aspocomp’s management will come to an end on May 20, 2024, when Manu Skyttä will take the helm as the CEO of the company. I would like to warmly thank the staff, shareholders and our customers for these years.”
NET SALES AND EARNINGS
January-March 2024
First-quarter net sales amounted to EUR 6.2 (8.9) million. Net sales decreased year-on-year by 30%. The development of net sales was impacted especially by muted demand in the semiconductor industry and a weaker product mix than in the comparison period.
The Semiconductor Industry customer segment’s first-quarter net sales decreased year-on-year by 71% to EUR 1.1 (3.7) million. The customer segment still suffered from high inventory levels in the value chain.
The Industrial Electronics customer segment’s first-quarter net sales increased year-on-year by 44% to EUR 1.2 (0.8) million. Net sales increased due to a slight recovery in demand.
The Security, Defense and Aerospace customer segment’s first-quarter net sales increased year-on-year by 14% and amounted to EUR 1.6 (1.4) million. The active sales work of Aspocomp was reflected in the increase of requests for offers and orders.
The Automotive customer segment’s first-quarter net sales decreased by 10% year-on-year and amounted to EUR 1.8 (2.0) million. The uncertain market situation slowed down deliveries.
The Telecommunication customer segment’s first-quarter net sales decreased year-on-year by 41% and amounted to EUR 0.6 (1.1) million. End customers’ weakened demand situation limited the growth of the customer segment.
The five largest customers accounted for 58% (61%) of net sales. In geographical terms, 83% (85%) of net sales were generated in Europe and 17% (15%) on other continents.
The operating result for the first quarter amounted to EUR -1.6 (0.3) million and operating result was -25.9% (3.8%) of net sales. The decline in the operating result was due to the decreased net sales caused by muted demand, the weakened product mix and the significant rise in material costs. Material costs were increased by a process disruption that continued from the fourth quarter of 2023.
Net financial expenses amounted to EUR 0.0 (0.0) million. Earnings per share were EUR -0.24 (0.04).
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/18/2025 | Andy Shaughnessy, Design007 MagazineIt’s been a busy week in our industry. Never a dull moment! If you’ve been paying attention to our tariff tumult with China and its effect on the stock market, especially if your company does a lot of business with China, you might be tempted to call in a Xanax refill about now. But hang tight. This is still early in the first quarter. This brouhaha serves to underscore our need to manufacture critical laminates and components in the U.S. In this week’s must-reads, we have a potpourri of articles covering tariffs, the next generation of HDI, the three-year anniversary of IPC Mexico, a novel green technology, and emerging design trends.
Real Time with... IPC APEX EXPO 2025: Aster–Enhancing Design for Effective Testing Strategies
04/18/2025 | Real Time with...IPC APEX EXPOWill Webb, technical director at Aster, stresses the importance of testability in design, emphasizing early engagement to identify testing issues. This discussion covers the integration of testing with Industry 4.0, the need for good test coverage, and adherence to industry standards. Innovations like boundary scan testing and new tools for cluster testing are introduced, highlighting advancements in optimizing testing workflows and collaboration with other tools.
IPC President’s Award: Xaver Feiner
04/17/2025 | Nolan Johnson, SMT007 MagazineThroughout his career, Xaver Feiner, vice president of marketing and sales at Zollner Elektronik, has developed extensive expertise in account management and new business development with a strong focus on the semiconductor industry, aerospace, and industrial electronics. Xaver has cultivated a profound understanding of global markets and remains deeply engaged with the challenges and opportunities presented by digital transformation. Since 2020, he has been an active member of the IPC Europe Advocacy Group, where he is dedicated to advancing the position of the electronics industry and the EMS sector across Europe.
New High Power 3D AXI for Power Electronics from Test Research, Inc.
04/17/2025 | TRITest Research, Inc. (TRI), a leading provider of Test and Inspection solutions for the electronics manufacturing industry, proudly announces the launch of the 3D AXI TR7600HP system. Designed for power semiconductor inspection, the TR7600HP enhances accuracy and efficiency in detecting defects in components such as IGBTs, MOSFETs, SiC inverters, and Paladin Connectors.
IPC APEX EXPO 2025 Learning Lounge: Education on the Show Floor
04/16/2025 | Andy Shaughnessy, Design007The conference portion of IPC APEX EXPO has been providing educational opportunities for attendees since the first show. But recently, show managers decided to expand education onto the show floor.