Real Time with… IPC APEX EXPO 2024: Laser-Based Micro Machining Systems from MKS
May 6, 2024 | Real Time with...IPC APEX EXPOEstimated reading time: Less than a minute
Casey Krueger, director of product marketing for MKS, introduces their laser-based micro machining systems, particularly the CO2 drilling system for the HDI market. They discuss CO2-formed vias, the benefits of AOD technology, hypersonics, and enhanced optical transmission. The discussion also covers accuracy and the application of water-cooled galvos. Casey offers insights into the advancements and enhancements in their second-generation CO2 drilling system.
Click to watch the interview on our Real Time with... IPC APEX EXPO 2024 event site.
Suggested Items
The Evolution of Picosecond Laser Drilling
06/19/2025 | Marcy LaRont, PCB007 MagazineIs it hard to imagine a single laser pulse reduced not only from nanoseconds to picoseconds in its pulse duration, but even to femtoseconds? Well, buckle up because it seems we are there. In this interview, Dr. Stefan Rung, technical director of laser machines at Schmoll Maschinen GmbH, traces the technology trajectory of the laser drill from the CO2 laser to cutting-edge picosecond and hybrid laser drilling systems, highlighting the benefits and limitations of each method, and demonstrating how laser innovations are shaping the future of PCB fabrication.
onsemi Achieves Validation of Near-Term Science-Based Emissions Reduction Targets
02/05/2025 | onsemiThe Science Based Targets initiative (SBTi) has approved onsemi’s near-term science-based emissions reduction targets. The validation of these targets attests that the planned decrease of onsemi’s greenhouse gas (GHG) emissions is aligned to the ambition of limiting global temperature rise to 1.5° Celsius.
Laser Photonics Propels R&D Efforts in PCB Depaneling
01/01/2025 | BUSINESS WIRELaser Photonics Corporation, a leading global developer of industrial laser systems for cleaning and other material processing applications, and its subsidiary, Control Micro Systems (CMS Laser), announced the expansion of their Printed Circuit Board (PCB) Depaneling technology development project for the electronics market.
Commercial UAVs have Potential to Halve CO2 Emissions for Freight Deliveries
10/26/2021 | Inmarsat‘UAVs: Unlocking positive transformation in the world’ highlights an unprecedented opportunity to reduce urban freight transport’s environmental impact by using drones.
New Robot Set to Save Lives, Cut CO2, Support Construction
06/08/2021 | Heriot-Watt UniversityA robot made famous by dancing on YouTube is set to help save lives and cut carbon dioxide emissions by supporting hazardous environment research at the National Robotarium, based at Heriot-Watt University in Edinburgh.
Copyright © 2025 I-Connect007 / Global Electronics Association Publishing Group All rights reserved.
Log in