The Critical Role of Materials
June 19, 2024 | Marcy LaRont, PCB007 MagazineEstimated reading time: 1 minute
![](https://iconnect007.com/application/files/9917/1880/7770/Anaya_Vardya_300_0624.jpg)
Materials and substrates are an ongoing discussion for PCB fabricators today, offering PCB designers and fabricators much more choice than was available two decades ago. When it comes to running a printed circuit board company, material management is a critical piece for operations. When you are doing high mix, lower volumes, material management can be an even greater challenge. This discussion with Anaya Vardya of American Standard Circuits sheds light on best practices, innovative approaches to vendor relationships, inventory management, and panel optimization, highlighting the critical role materials play in the success of electronics manufacturing today.
Marcy LaRont: Anaya, ASC is a high-tech PCB manufacturing facility that works with many different product and material types. What is your approach to material management?
Anaya Vardya: On the supply chain side of material management, we have a large range of materials used for the products we manufacture. For standard FR-4, we are fortunate to have a handful of different material vendors that stock in the Chicago area. This means we can minimize the amount of inventory we're holding inside our facility, which saves space and inventory dollars. We typically have multiple deliveries a week from these suppliers. In the worst case, we can drive over to the supplier and pick up material.
LaRont: Local sourcing is certainly key to just-in-time inventory management if you aren’t holding everything in-house. But what about less standard material types?
Vardya: Beyond FR-4, our strategies for holding stock and managing lead times are, out of necessity, a bit different. Because we have such a wide variance of materials and lead times, we proactively inform our customers of material lead times when we're quoting the job. If a specialty material needs to be manufactured, we determine the manufacturing lead time, shipping strategy, and cost and communicate that at the quote stage. Of course, it's the best information we have at that time. We live in a dynamic world, as you know.
To read this entire conversation, which appeared in the June 2024 issue of PCB007 Magazine, click here.
Suggested Items
Indium Corporation’s New Type 6 Jetting Solder Paste Hits Market
06/26/2024 | Indium CorporationIndium Corporation® is pleased to introduce a new jetting solder paste to join its PicoShot® series of products. PicoShot® NC-6M is a no-clean, halogen-free, Type 6 powder-size material specifically formulated to be compatible with Mycronic jetting systems and Mycronic’s “small dot” ejector.
Altair Announces Material Collaboration with HP
06/25/2024 | AltairThe collaboration will help break down traditional barriers to 3D printing adoption and ultimately help customers better design parts for Multi Jet Fusion and Metal Jet printers.
Mustaches and Automation in Flexible PCB Fabrication
06/24/2024 | Chris Clark, Flexible Circuit TechnologiesIn any manufactured product, whether a house or a flexible circuit, there is always a raw material component in the overall cost. In the flexible circuit, flexible heater, and rigid-flex industry, sheet materials can account for 20–60% of the overall price. Admittedly, this is a very broad range, but factors, such as how common the materials are in the region where they are made, can cause this to swing one way or the other. Your actions as an engineer or sourcing agent have an impact on overall cost, which I’ll illustrate through the example of building a house.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/21/2024 | Marcy LaRont, PCB007 MagazineHe’s back, and in splendid form. Pete’s Starkey’s coverage of the EIPC Summer Conference, which took place June 4-5 at the European Space Centre, The Netherlands, is top notch. Joan Tourné from NextGIn Technologies emphasized that our attention must be focused on the interconnection ability of our PCBs and highlights VeCS as an alternative to the traditional plated-through-hole approach. Finally, Martyn Cauwe of IMEC discusses environmental impact and specifically, the need for a better, parametric approach to quantifying it, something European businesses are being required to do on the regular.
Day 2: A Full Day at the EIPC Summer Conference
06/19/2024 | Pete Starkey, I-Connect007Editor's note: This is the third and final report from the EIPC Summer Conference. It was a bright and early start to the second day of the 2024 EIPC Summer Conference at the European Space Centre, Noordwijk, The Netherlands, June 4-5. A short journey by bus from the hotel in Leiden and our security passes from the day before got us through the gate and to our seats in the Newton Room for Session 4, “Material Studies,” moderated by Martyn Gaudion.