Dan’s Biz Bookshelf: ‘Dream First, Details Later
Happy’s Tech Talk #40: Factors in PTH Reliability—Hole Voids
Facing the Future: Time for Real Talk, Early and Often, Between Design and Fabrication
Continuous Improvement Veteran Florin Larion Joins Intervala as Director of Operational Excellence
July 11, 2024 | IntervalaEstimated reading time: 1 minute
Intervala LLC, a premier full-service electronics manufacturing services provider, announced that Florin Larion, an accomplished lean and continuous improvement leader, has been named corporate director of operational excellence. In this role, Florin is responsible for advancing a culture of continuous improvement throughout Intervala’s business and using Lean methodologies and tools to achieve companywide process-related improvements and strategic objectives.
Florin joined Intervala from AR RF/Microwave Instrumentation, bringing nearly 20 years of Lean practitioner experience within the global manufacturing arena. He previously held continuous improvement management roles and led Lean initiatives for Knoll Inc., Sterlite Technologies Ltd., NCR Corporation, Flextronics International Ltd., Corning Cable Systems, and Danaher Corporation, among other U.S.-based and global manufacturers. Florin holds a master’s degree in mechanical engineering from the Polytechnic Institute of Cluj and is a Lean Six Sigma master black belt, certified DMAIC Six Sigma black belt and recognized kaizen sensei.
“Our unrelenting commitment to operational excellence is a key element of Intervala’s culture and promise to always provide our customers with the smartest solutions to achieve their organizational goals,” said Teresa Huber, president and CEO. “We are excited to welcome another high-caliber professional such as Florin to the Intervala team and look forward to him applying his extensive lean and continuous improvement expertise to further facilitate companywide process-related improvements and strategic objectives for the benefit of our customers.”
Share on:
Suggested Items
The Knowledge Base: A Conference for Cleaning and Coating of Mission-critical Electronics
07/08/2025 | Mike Konrad -- Column: The Knowledge BaseIn electronics manufacturing, there’s a dangerous misconception that cleaning and coating are standalone options, that they operate in different lanes, and that one can compensate for the other. Let’s clear that up now. Cleaning and conformal coating are not separate decisions. They are two chapters in the same story—the story of reliability.
Toni Patzner Becomes Global Head of Supply Chain Management at ASMPT SMT Solutions
07/01/2025 | ASMPTOn June 1, 2025, Toni Patzner assumed the position of Global Head of Supply Chain Management. The experienced manager succeeded Jörg Cwojdzinski, who retired after decades of service.
Absolute EMS Strengthens Cleaning Capabilities with Aqua Klean T18 Typhoon Inline System
06/19/2025 | Absolute EMS, Inc.Absolute EMS, Inc., a six-time award-winning provider of fast turnaround, turnkey contract electronic manufacturing services (EMS), has expanded its cleaning capabilities with the addition of the T18 Typhoon Inline Cleaning System from Aqua Klean Systems.
KYZEN Focuses on Aqueous Cleaning and Stencil Cleaning at SMTA Ontario
06/09/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Ontario Expo and Tech Forum, scheduled to take place Tuesday, June 17 at the Venu Event Space in Vaughan, Ontario, Canada. KYZEN will be on-site to provide information about aqueous cleaning chemistry AQUANOX A4618 and the full line of AQUANOX products.
The Chemical Connection: Reducing Defects in Circuit Board Production
06/04/2025 | Don Ball -- Column: The Chemical ConnectionWe all agree that in any manufacturing process, reducing defects in your product induced during manufacture (aka increasing yields) is a good thing. Doing so, however, can be a source of contention and frustration. I don’t pretend to be an expert in this field, because most of my work involves feasibility studies for new concepts or testing improvements made to existing equipment. High yields were usually not a factor; it’s simply about having enough data to prove or disprove a concept or seeing whether improvements to equipment design actually work. However, here are some observations I made visiting quality shops where high production at high yields was important.